BEGA LED-0689-930 Ecessed Light Luminaire Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA LED-0689-930 Ecessed Light Luminaire
Product Information
The product is a luminaire that requires installation and operation according to national safety regulations. It should only be installed and commissioned by a qualified electrician. The manufacturer is not liable for any damage caused by improper use or installation. If modifications are made to the luminaire, the person responsible for these modifications is considered the manufacturer
The luminaire is equipped with electronic components that are protected
against overvoltage according to DIN EN 61547. For additional protection
against transients and other overvoltage events, separate overvoltage
protection components are recommended.
These components can be found on the manufacturer’s website at
www.bega.com.
Ceiling luminaire for indoor use
Instructions for use
Application
Ceiling luminaire · indoor luminaire with aluminium housing for non-glare
light deflected downwards.
Product description
- Ceiling luminaire »STUDIO LINE«
- Aluminium housing shield,
- Finish Colour velvet black
- inside hue aluminium matt
- Light-diffusing silicone lens
- Mounting plate with 2 fixing holes ø 4.5mm · 60mm spacing
- Connecting terminals 2.5@
- Earth conductor connection
- BEGA Ultimate Driver®
- LED power supply unit 220-240 V x 0/50-60 Hz
- DC 176-264 V
Safety class I
- – Safety mark
- CE – Conformity mark
- Weight: 0.3 kg
This product contains light sources of energy efficiency class(es) D
Safety
- The installation and operation of this luminaire are subject to national safety regulations.
- Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation.
- If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer
Overvoltage protection
- The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
- To achieve an additional protection against e.g. transients, etc. we recommend separate overvoltage protection components.
- You can find them on our website at www.bega.com
Lamp
- Module connected wattage 4.9 W
- Luminaire connected wattage 6 W
- Rated temperature ta=25 °C
- Ambient temperature ta max=40 °C
50 182.2K3
- Module designation LED-0689/930
- Colour temperature 3000 K
- Colour rendering index CRI > 90
- Module luminous flux 775 lm
- Luminaire luminous flux 316 lm
- Luminaire luminous efficiency 52,7 lm/W
The product specifications include:
- Lamp Module connected wattage: 4.9 W
- Luminaire connected wattage: 6 W
- Rated temperature: 25°C
- Ambient temperature: 40°C
- Module designation: LED-0689/930
- Colour temperature: 3000 K
- Colour rendering index (CRI): >90
- Module luminous flux: 775 lm
- Luminaire luminous flux: 316 lm
- Luminaire luminous efficiency: 52.7 lm/W
Product Usage Instructions
- Ensure that the luminaire is installed and operated in compliance with national safety regulations.
- Contact a qualified electrician for the installation and commissioning of the luminaire.
- Do not make any modifications to the luminaire without proper authorization and expertise.
- If additional protection against overvoltage events is desired, consider using separate overvoltage protection components available on the manufacturer’s website.
- Refer to the product specifications for the connected wattage and temperature requirements.
- Make sure the ambient temperature does not exceed 40°C during operation.
- Use the specified LED module (LED-0689/930) with a colour temperature of 3000 K and a CRI greater than 90.
- Note that the module luminous flux is 775 lm and the luminaire luminous flux is 316 lm.
- Keep in mind that the luminaire has a luminous efficiency of 52.7 lm/W.
- For any spare parts, refer to the provided codes: Shield (42 000 202 .1L), LED power supply unit (DEV-0303/350), and LED module 3000 K (LED-0689/930).
Installation
- LED are high-quality electronic components!
- Please avoid touching the light output opening of the LED directly during installation or relamping.
- Pull off LED cover from mounting plate.
- Pass the power connecting cable through the cable entry in the mounting plate.
- Fasten the mounting plate with the supplied fastening material or other suitable fastening material to the installation surface.
- Make the earth conductor connection and the electrical connection to the terminals.
- Clip LED cover onto mounting plate.
- Pass the enclosed housing shield over the LED cover until the housing shield latches in place audibly.
Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt.
Replacement of the LED module
- The designation of the LED module is noted on a label in the luminaire.
- The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
- Disconnect the system.
- Pull housing shield off the mounting plate.
- Open the luminaire.
- Please follow the installation instructions for the
- LED module. Close the luminaire.
- Pass the housing shield with its inner groove to the front over the LED cover until the housing shield latches in place audibly
Spares
- Shield 42 000 202 .1L 6
- LED power supply unit DEV-0303/350
- LED module 3000 K LED-0689/930
BEGA Gantenbrink-Leuchten KG
- Postfach 3160
- 58689 Menden
- info@bega.com
- www.bega.com