BEGA 33816 Wall Luminaire Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 33816 Wall Luminaire
Product Usage Instructions
Instructions for use
Product Description
Safety
Installation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 33816 Wall Luminaire

Product Information Product Name: Wandleuchte Wall luminaire Applique
Model Number: 33 816
Power: 40W
Voltage: 230V Light Distribution: Symmetrical
Application: Shielded wall luminaire with symmetrical light distribution, suitable for installation on columns and wall faces.
Dark Sky: The luminaire directs light evenly and efficiently onto the surface to be illuminated, emitting less than 1% of the luminaire luminous flux into the upper half-space of the luminaire.
Overvoltage Protection: The electronic components in the luminaire are protected against overvoltage according to DIN EN 61547. Additional overvoltage protection components are recommended for protection against transients. These components can be found on the manufacturer’s website at www.bega.com.
Safety: The installation and operation of this luminaire must comply with national safety regulations. Only a qualified electrician should perform the installation and commissioning. The manufacturer is not liable for damage caused by improper use or installation. Any modifications made to the luminaire should be done by a responsible person who will be considered the manufacturer.

Lamp Information:

Module-Connected Wattage: 13.7W
Luminaire-Connected Wattage: 16W
Rated Temperature: 25°C
Ambient Temperature: 50°C

Module Information (K3):

Module Designation: LED-0341/830
Colour Temperature: 3000K
Colour Rendering Index (CRI): >80
Module Luminous Flux: 2600lm
Luminaire Luminous Flux: 1729lm
Luminaire Luminous Efficiency: 108.1lm/W

Module Information (K4):

Module Designation: LED-0341/840
Colour Temperature: 4000K
Colour Rendering Index (CRI): >80
Module Luminous Flux: 2670lm
Luminaire Luminous Flux: 1775lm
Luminaire Luminous Efficiency: 110.9lm/W

Product Usage Instructions

Do not touch the light output opening of the LED directly during installation or relamping.
Ensure that the gasket is positioned correctly.
Create an earth conductor connection between the luminaire top and luminaire base.
Install the luminaire top, press-on, and manually tighten screws evenly.

Wall luminaire

Instructions for use

Application
Shielded wall luminaire with symmetrical light distribution makes it particularly well-suited for installation on columns and wall faces.

Product Description

Luminaire made of aluminium alloy, aluminium and stainless steel
BEGA Unidure® coating technology
Colour graphite or silver
Safety glass with optical structure
Silicone gasket
Reflector made of pure anodised aluminium 2 mounting holes ø 4.5 mm
Distance apart 105 mm
2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm, max. 5 G 1.5@ Connecting terminal and earth conductor terminal 2.5@
BEGA Ultimate Driver®
LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-264 V
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Protection class IP 64
Dust-tight and protection against splash water Impact strength IK04
Protection against mechanical impacts < 0.5 joule
– Safety mark
– Conformity mark
Weight: 1.7 kg

This product contains light sources of energy efficiency class(es) C

Dark Sky
The light from this luminaire is directed evenly and highly efficiently onto the surface to be illuminated and emits less than 1 % of the luminaire luminous flux into the upper half-space of the luminaire.

Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Lamp

Module connected wattage 13.7 W
Luminaire connected wattage 16 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 50 °C

33 816 K3

Module designation LED-0341/830
Colour temperature 3000 K
Colour rendering index CRI > 80
Module luminous flux 2600 lm
Luminaire luminous flux 1729 lm
Luminaire luminous efficiency 108,1 lm / W

33 816 K4

Module designation LED-0341/840
Colour temperature 4000 K
Colour rendering index CRI > 80
Module luminous flux 2670 lm
Luminaire luminous flux 1775 lm
Luminaire luminous efficiency 110,9 lm / W

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.

In outdoor areas, the light emission may only be directed downwards.
Undo the screws and lift off the luminaire top. Lead the mains supply cable through the cable entry of the luminaire base.
Note position of application of the luminaire “arrow down”.
Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
Be sure to use the gasket rings supplied. Make the earth conductor connection and the electrical connection.
For digital control please use the connecting terminal DA, DA.
In case this terminal is not used the luminaire will be operated at full light output.
In order to guarantee the maximum service life of the electrical components, the enclosed desiccant pouch must be placed in the luminaire.
Remove the desiccant pouch from the foil packaging and place it in the position marked by the red information label immediately before finally closing the luminaire.
Make sure that gasket is positioned correctly.
Make earth conductor connection between luminaire top and luminaire base.
Install the luminaire top, press-on and manually tighten screws evenly.

Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high pressure cleaners.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Close the luminaire.

Spares