BEGA 50598 LED Ceiling and Wall Luminaire Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
50 598
Ceiling and wall luminaire for indoor use Instructions for use
Application
Ceiling and wall luminaire · indoor luminaire made of crystal glass, inside white and metal housing, for all lighting tasks in interior applications.
Product description
Luminaire made of painted metal housing,
finish Colour white
Crystal glass, inside white
1 cable entry for mains supply cable
The luminaire is suitable for through-wiring.
2 mounting holes ø 5.5 mm
Distance apart 250 mm
Connection terminal 2.5@
Earth conductor connection
2-pole connecting terminal for
digital control
LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-264 V
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains
and control cables
BEGA Thermal Control® Temporary thermal regulation to protect temperature-
sensitive components without
switching off the luminaire
Safety class I
Impact strength IK07
Protection against mechanical
impacts < 2 joule
– Safety mark
– Conformity mark
Weight: 5.1 kg
This product contains light sources of energy
efficiency class(es) D
Safety
The installation and operation of this luminaire are subject to national
safety regulations.
Installation and commissioning may only be carried out by a qualified
electrician.
The manufacturer accepts no liability for damage caused by improper use or
installation. If subsequent modifications are made to the luminaire, the
person responsible for these modifications shall be considered the
manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against
overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we
recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.
Lamp
Module connected wattage | 22.8 W |
---|---|
Luminaire connected wattage | 26.2 W |
Rated temperature | ta = 25 °C |
Ambient temperature | ta max = 35 °C |
50 598 K3
Module designation | 6x LED-0343/930 |
---|---|
Colour temperature | 3000 K |
Colour rendering index | CRI > 90 |
Module luminous flux | 3780 lm |
Luminaire luminous flux * | 2288 lm |
Luminaire luminous efficiency | 87,3 lm / W |
Installation
LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during
installation or relamping.
Lead the mains supply cable through the cable entry of the luminaire base.
Note position of application of the luminaire “arrow down”.
Fix luminaire base with enclosed or any other suitable fixing material onto
the mounting surface.
Be sure to use the gasket rings supplied.
Establish earth conductor connection and make the electrical connection to the
terminals.
For digital control please use the connecting terminal DA, DA.
In case this terminal is not used the luminaire will be operated at full light
output.
IMPORTANT: Before installing the glass on the luminaire base, make sure
that the 3 glass retaining rods are correctly screwed onto the glass over the
knurled nuts – ensure that they are securely seated!
Attach glass to luminaire base and turn the glass clockwise until it is
locked.
The spring closure provides a safe and vibration-resistant holding of the
glass.
To release the glass from the luminaire housing, turn it counter-clockwise
beyond the spring closure resistance.
Replacement of the LED module
Disconnect from main supply. Unscrew the glass by turning it counter-clockwise
beyond the spring closure resistance and take it off the luminaire housing.
Clean glass and luminaire regularly with solvent-free cleansers from dirt.
Disassemble LED module. Assemble LED replacement module. Note installation
instructions of the LED module. Attach glass to luminaire housing and turn the
glass clockwise until it is locked. A broken glass must be replaced.
Spares
Spare glass | 11 003 053 11M RG |
---|---|
LED power supply unit | DEV-0388/700i |
LED module 3000 K | LED-0343/930 |
BEGA Gantenbrink-Leuchten KG
Postfach 31 60
58689 Menden
info@bega.com
www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>