Ford 2018 Mustang Instruction Manual

Ford 2018 Mustang Instruction Manual

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Remove the intake manifold.
   Refer to: Intake Manifold (303-01B Engine – 5.0L Ti-VCT V8 (308kW/418PS), Removal and Installation).

2. Position the cover and disconnect the CKP sensor electrical connector, remove the bolt and the sensor. Torque: 89 lb.in (10 Nm)
   

Installation

1. To install, reverse the removal procedure.
2. Using the scan tool, perform the Misfire Monitor Neutral Profile Correction procedure, following the on screen instructions.

Copyright © 2020 Ford Motor Company

This publication contains material that is reproduced and distributed under a licence from Ford Motor Company. No further reproduction or distribution of the Ford Motor Company material is allowed without the express written permission of Ford Motor Company.

Copyright 2007 – 2020 Service Repair Solutions, Inc.

https://dh.identifix.com/SearchFixes/IndexROID=322301968&VID=2501304&VSM=4&HasBookmark=0&LocationId=2&WorkflowPath=1&KW=cranks… 1/1

Removal and Installation: Cra…
303-14B Electronic Engine Controls – 5.0L Ti-VCT V8 (308kW/418PS) 2018 Mustang Removal and Installation

References

• Direct-Hit -- Your Session has been Terminated

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>