SLV 1000336 Square Wall Lamp Instruction Manual

: June 12, 2024
: SLV

Table of Contents

SLV 1000336 Square Wall Lamp
Product Information
Product Usage Instructions
FEATURES
TOOLS REQUIRED
INSTALLATION
Use as directed
Care / Storage
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SLV 1000336 Square Wall Lamp

Product Information

Model: Wall Light 1000336
IP Rating: IP44
Power Supply: 220V-240V~50/60Hz
Maximum Wattage: 20W (E27 socket)
Dimensions: 13 x 22.5 x 18 cm
Weight: 1.15 kg

Product Usage Instructions

Installation:
- The installation of this wall light requires expert knowledge and should only be carried out by an approved electrician, following local and national regulations.
- Ensure that the mains power is switched off before starting the installation.
- Use only the described accessories and suitable fastening materials for installation.
- This wall light is designed for wall surface mounting only.
- Follow local regulations for outdoor installations.
- Do not seal the product yourself with silicone.
- Install the wall light according to the declared IP type.
- Refer to the figure provided in the manual for proper installation orientation.
Electrical Connection:
- Before making any electrical connections, ensure that the mains power is switched off and the fixed connection cable is disconnected.
- Equip flexible wire ends with suitable wire ferrules.
- Connect the live conductor to terminal L, the neutral conductor to terminal N, and the protective conductor to the earth terminal.
- Check for secure fixation and proper functioning of the electrical connections.
Lamp Replacement:
- Disconnect the wall light from the main power and allow it to cool down before replacing the lamp.
- Use only E27 light sources with a maximum wattage of 20W.
- Clean the gasket if it becomes dirty.
- Tighten the screws evenly and in a cross-wise manner.
Care and Storage:
- Disconnect the product from mains power and allow it to cool down before performing any cleaning or storage.
- Regularly clean the external surfaces using a slightly moistened cloth (water only). Do not use a pressure washer.
- Ensure that the openings providing aeration or drainage are kept free from obstructions.
- Avoid exposing the product to acidic surroundings, high salt content in the air, cleaning agents, fertilizer, thawing salt, and chemicals.
- Store the product in a dry and clean environment.

FEATURES

$SLV-1000336-Square-Wall-Lamp-FIG-1 $3$$

TOOLS REQUIRED

INSTALLATION

$SLV-1000336-Square-Wall-Lamp-FIG-1 $4$$

The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!

Operating Manual PART B Wall Light: 1000336
Read the manual carefully and keep it for further use!
Safety advice for installation and operation. Disregarding may lead to the danger of life, burning, or fire! Any work on the electrical connection only by the electrician. Do not alter or modify the product. Do not fasten anything on the product. Do not cover the product. Operate only with intact protection glass or protection cover. Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician. Take measures that children get not harmed by the product. Additional safety advice =

Use as directed

Safety class I (1) Connection with protective conductor. Operate only firmly fixed on an even surface. Operate only on normal or not inflammable surfaces. Do not strain mechanically or expose to strong dirt contamination.
IP44: Protection against foreign objects > Ø 1,0mm – Protection against splashing water from all directions.

Lamp replacement

Disconnect the luminaire from the mains and let it cool down.
Suitable light sources: E27, 20W max.
Clean gasket when dirty.
Tighten screws evenly and cross-wise.

Care / Storage

Disconnect the product from the mains and let it cool down. Clean external surfaces regularly with a slightly moistened (water) cloth. Do not clean with a pressure washer. Openings providing aeration or drainage must be kept free. The following influences may have unwanted effects on the product: acidic surroundings, high salt content in the air, cleaning agents, fertilizer, thawing salt, and chemicals. Store dry and clean.