SLV 1002002 Gloo Pure Wall Lamp Instruction Manual

: June 11, 2024
: SLV

Table of Contents

SLV 1002002 GlooPure Wall Lamp
Product Information
Product Usage Instructions
INSTRUCTION MANUAL PART A
Operating Manual PART B
- Use as directed
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SLV 1002002 GlooPure Wall Lamp

SLV-1002002-Gloo-Pure-Wall-Lamp

Product Information

Model Number: 1002002
IP Rating: IP44
Power Supply: 220V-240V ~50/60Hz
Maximum Wattage: 23W (E27)
Dimensions: 20 x 33,5 x 21,1 cm
Weight: 1,60 kg

The wall light is designed for outdoor use and has an IP44 rating which means it is protected against solid objects greater than 1mm and water splashes from all directions.

Product Usage Instructions

Safety Advices: Read the manual carefully before installation and keep it for future reference. Installation should only be carried out by an approved electrician who should take into consideration local and national regulations. Failure to do so may lead to danger of life, burning or fire. Do not alter or modify the product, do not fasten anything on the product, and do not cover the product. Operate only with intact protection glass.
Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician. Take measures that children get not harmed by the product.

Lamp Replacement: Before replacing the lamp, disconnect the luminaire from mains and let it cool down. Suitable light sources: E27, 23W max. Clean gasket when dirty.

Care/Storage: Disconnect product from mains and let it cool down. Clean external surfaces regularly with a slightly moistened (water) cloth. Do not clean with a pressure washer.
Openings providing aeration or drainage must be kept free. The following influences may have unwanted effects on the product: acidic surrounding, high salt content in the air, cleaning agents,fertilizer, thawing salt, chemicals. Store dry and clean.

Installation: Switch off mains/fixed connectioncable before installation. Use only described accessories and suitable fastening materials. Only suited for wall surfacemounting. Follow local regulations for outdoor installations. Do not seal the product yourself (e.g. with silicone). Install according to declared IP type. Install as shown in the figure.

Electrical Connection: Direct the fixed wiring with its complete insulation at least 15 mm into the housing. Equip wires of the fixed wiring with protective tubes and flexible wire ends with suitable wire ferrules. Live conductor is connected to Terminal L, neutral conductor to Terminal N, and protective conductor to Earth terminal. Check secure fixation and proper function.

INSTRUCTION MANUAL PART A

Wall Light

SLV-1002002-Gloo-Pure-Wall-Lamp-1

The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!

Operating Manual PART B

Wall Light
1002002

Read manual carefully and keep for further use!
Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Operate only with intact protection glass.
Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Additional safety advices =

SLV-1002002-Gloo-Pure-Wall-Lamp-2

Use as directed

Safety class I (1) – Connection with protective conductor.
Operate only firmly fixed on an even surface.
Operate only on normal or not inflammable surfaces.
Do not strain mechanically or expose to strong dirt contamination.
IP44: Protection against foreign objects > Ø 1,0mm – Protection against splashing water from all directions.
Max. admissible ambient temperature(ta): 25°C.

Lamp replacement

Disconnect luminaire from mains and let it cool down.
Suitable light sources: E27, 23W max.
Clean gasket when dirty.

Care / Storage

Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Do not clean with pressure washer.
Openings providing aeration or drainage must be kept free.
The following influences may have unwanted effects on the product: acidic surrounding, high salt content in the air, cleaning agents, fertilizer, thawing salt, chemicals.
Store dry and clean.