AFX MOTORSPORTS HER024 Antenna Mounting Base w/ 1.75 Inch Universal Accessory Mounting System Instruction Manual
- June 11, 2024
- AFX MOTORSPORTS
Table of Contents
AFX MOTORSPORTS HER024 Antenna Mounting Base w/ 1.75 Inch Universal
Accessory Mounting System
Product Information
The product is a Universal Accessory Mounting System kit manufactured by AFX Motorsports. The kit includes three pieces – A, B, and C, along with eight screws, eight security nuts, a 5/32 Allen key, and a 7/16 combination wrench. The kit is designed to mount accessories onto a vehicle tube.
Product Usage Instructions
- Attach the antenna to the mounting base using the 1/4 x 3/4 screws and 1/4 locknuts. Tighten all screws firmly.
- Join piece C with piece B using the 1/4 x 3/4 screws and 1/4 locknuts provided in the package. Do not fully tighten the screws.
- Once both pieces are joined, position piece A on one side of the vehicle tube, next to pieces B and C. Join them using the remaining 1/4 x 3/4 screws and locknuts as shown in the image. Do not tighten the screws yet.
- Tighten all screws firmly once all pieces are joined and positioned correctly.
Please note that the liability statement applies to product usage and installation. For any further information or assistance, please contact info@afxmotorsports.com.
HOW TO INSTALL
Pieces included:
Hardware:
- (8x) Screw 1/4″ x 3/4″
- (8x) Security Nut 1/4″
Tools needed (Not Included):
- 5/32″ Allen Key
- 7/16″ Combination Wrench
- Join piece “C” with piece “B” using the 1/4″ x 3/4″ screws and the 1/4 lock nuts (included in the package). Do not fully tighten the screws.
- Once both pieces are joined, join the kit to the vehicle, position piece A on one side of the vehicle tube, next to the other, pieces B and C, and with the remaining 1/4″ x 3/4″ screws and the 1/ 4″ lock nuts (included in the package) join them as indicated in the image. Do not tighten screws yet.
- From here attach the antenna using the 1/4″ x 3/4″ screws and 1/4″ locknuts. Be sure to tighten all screws.
Liability Statement
AF1 Motorsports products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AF1 Motorsports and is not recommended. AF1 Motorsports products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact AF1 Motorsports to verify that they will work together. Although AF1 Motorsports has thousands of satisfied customers, user should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. AF1 Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AF1 Motorsports products, user agrees that should damages occur, AF1 Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AF1 Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AF1 Motorsports. The total liability of seller to the user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AF1 Motorsports will warranty only parts provided by AF1 Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AF1 Motorsports. AF1 Motorsports parts and products are not warranted if the item was not installed properly, misused, or modified.
- Now you have completed the installation. For technical support, please write us at:info@afxmotorsports.com or call us at:
- www.afxmotorsports.com
- 4610 Modern Lane, Laredo, TX 78041 Ph.956-242-6521
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>