myGEKOgear CYCLONE O2 Hepa 13 Mini Air Purifier Instructions

: June 6, 2024
: myGEKOgear

Table of Contents

CYCLONE O2 Hepa 13 Mini Air Purifier
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CYCLONE O2 Hepa 13 Mini Air Purifier

HEPA 13 MINI AIR PURIFIER

INSTRUCTIONS

Please read the instruction carefully before using.

CYCLONE O2 Introduction

CYCLONE O2 is a low noise & energy-efficient True HEPA personal air purifier with
360-Degree air intakes and premium H13 activated carbon filter. Effectly reduces harmful
germs, dust, pollen, pet dander, mold spores, and other allergens, bringing your family new
fresh air.

UA-O2 Product Features

HEPA H13 Activated Carbon Filter
Essential Oil Diffuser
3 Million Negative lon Generator
Auto / Manual Purifying Mode
ONPRO Airsense air quality detection
8 Hours Atuo—Off Power Saving
Vertical or Horizontal operation position

Operating instructions

1. Plug in MicroUSB Cable and connect with
5V/1A USB Wall Charger.

2. CYCLONE ©2 will automaticly turn on and start detect air quality and warming up for 120 seconds with flashing white indication.

In Automatic Mode, CYCLONE O2 will adjust fan speed according to
the environment air quality condition. Power button

About Air Quality Indication Light Color:
Green — Good air quality/ Low Fan Speed
Blue — Poor air quality/ Mid Fan Speed
Red — Bad air quality / High Fan Speed

3. CYCLONE 02 can be placed horizontally:
Spin out the stand at the bottom of the base as image shown.

4. Touch the power button 2 seconds to turn off.

5. After 8 hours continuous working,
will automatically turn off for power saving.

6. Filter Replacement:
Replace new filter (UA-O2H13C)
when red light flashes.
Touch the power button 10 seconds for restoration.

Remove: Shift the base toward “OPEN”
direction and pull out the filter.

Replace: Align with both “White” dot on the
base and the main body,
shift the base toward the “CLOSE”
direction gentally.
Replacement completed.

Sterilize, Deodorize, Air Purify

Product Maintenance

Turn off and unplug microUSB cable.
Use soft clothy to remove dust.
Do not use detergents or flammable solvents on the device.
Please always keep the air inlet and outlet clean for best purifying performance.
Do not water wash the HEPA filter.

Attention / Warning

Use CYCLONE 02 in a dry environment.
Do not use this product at temperature above 70°C.
Avoid direct exposure under sunlight .
Do not cover the product with anything.
This product is not a toy, keep children away from it.
Dropping may cause product damage.
Do not try to repair or disassemble the product.
Avoid small metal objects get into air inlet and outlet,
which may cause product short circuit or function damage.
The working power of CYCLONE O2 is DC 5V/1A.
Please use proper USB Charger for power input.

UA-O2 Specification

Filter: H13 Carbon HEPA Filter
Noise: 37 ~ 48db ( Full Speed )
Negative lon: 3 million / cm?
Coverage: <5m
Fan Speed: 3 Levels
Airflow: 3.7CFM ( RPM : $5800 max )
CADR: 6m?/H
Rated Voltage: DC 5V
Rated Power: = 5W
Material: ABS » PP + Activated Carbon
Dimension: 16875*75 mm
Weight: 218.5 g