AFX MOTORSPORTS SKI002 Aluminum Skid Plate Instruction Manual
- June 11, 2024
- AFX MOTORSPORTS
Table of Contents
AFX MOTORSPORTS SKI002 Aluminum Skid Plate
Product Information
Aluminum Skid Plate for Kawasaki Brute Force 650i/750
The Aluminum Skid Plate is designed for off-road use only and is compatible with Kawasaki Brute Force 650i/750 models. The skid plate package includes the following:
- (x1) Belly
- (x2) Front suspension arms
- (x2) Rear suspension arms
- (x1) Tail
- (x24) 6 x 50mm Screws
- (x24) Flat Washers
The installation manual provides detailed instructions on how to install the skid plate onto the vehicle using the included hardware.
Product Usage Instructions
- Begin by selecting the points on the vehicle where you want to attach the skid plate belly. Use the (x6) 6mm x 50mm screws and flat washers to attach the belly to the vehicle, but do not tighten the screws yet.
- Next, attach the front suspension arms and the front of the skid plate to the vehicle in that order using the (x6) 6mm x 50mm screws and flat washers. Do not tighten the screws yet.
- Then, install the rear suspension arms and tail (in that order) to the rear of the vehicle using the (x6) 6mm x 50mm screws and flat washers. Tighten the bolts.
- Use a 3/4 wrench, 7/32 Allen key, or a 9/16 or 14mm combination wrench to tighten all screws.
- For any questions or concerns, contact AFX Motorsports at info@afxmotorsports.com.
It is important to note that the Aluminum Skid Plate is designed for off-road use only. Use on paved surfaces may result in damage to the skid plate or vehicle. Read the liability statement in the installation manual carefully before using the product.
HOW TO INSTALL
Pieces included
- (x2) Front suspension arms
- (x1) Front
- (x1) Belly
- (x1) Tail
- (x2) Rear suspension arms
Hardware
- (24x) 6 x 50 mm Screw
- (24x) Flat Washer
Tools needed (Not Included)
- 3/4″ Wrench.
- 7/32″ Allen Key.
- 9/16″ Or 14 mm Combination Wrench.
- First, attach the belly to the vehicle at the selected points with the 6mm x 50mm bolts (which come in the package) do not tighten the bolts yet.
- Then attach the front suspension arms and the front (in that order) to the vehicle with the 6mm x 50mm screws and flat washers (included in the package). Do not tighten screws yet.
- Finally install the rear suspension arms and tail (in that order) to the rear of the vehicle using the 6mm x 50mm screws and flat washers (included in the package). Tighten the bolt.
Liability Statement
AF1 Motorsports products are designed to best fit the user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AF1 Motorsports and is not recommended. AF1 Motorsports products could interfere with other aftermarket accessories. If the user has aftermarket products on the machine, contact AF1 Motorsports to verify that they will work together. Although AF1 Motorsports has thousands of satisfied customers, users should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of the machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases the risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect users from severe injury or death. AF1 Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AF1 Motorsports products, the user agrees that should damages occur, AF1 Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AF1 Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AF1 Motorsports. The total liability of the seller to the user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AF1 Motorsports will warranty only parts provided by AF1 Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AF1 Motorsports. AF1 Motorsports parts and products are not warranted if the item was not installed properly, misused, or modified.
For technical support, please write us to: info@afxmotorsports.com or call us at: Ph. 956-242-6521
www.afxmotorsports.com 4610 Modern Lane, Laredo, TX 78041 Ph. 956-242-6521
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>