AFX MOTORSPORTS TEC056 Aluminum Roof Installation Guide

: June 11, 2024
: AFX MOTORSPORTS

Table of Contents

THANKS YOU!
HOW TO INSTALL
Customer Service
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

AFX MOTORSPORTS TEC056 Aluminum Roof

THANKS YOU!

FOR PURCHASING AT AFX MOTORSPORTS

ALUMINIUM ROOF

FOR CANAM DEFENDER 2018-2022

HOW TO INSTALL

Pieces Included

(x1) Aluminium Roof
(x2) Side Support
(x1) Anti-rattling Strip
4x) 1/4” x 1 1/2“ Screws
(18x) 1/4” Washer
(5x) 1/4” x 1“ Screw
(9x) 1/4” Lock Nut

Tools Needed ( Not Included)

7/32” Allen Key
9/16” or 14mm Combination Wrench

TIP: Install the Bolts Finger tight at first until all hardware has been installed.

Liability Statement

AF1 Motorsports products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AF1 Motorsports and is not recommended. AF1 Motorsports products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact AF1 Motorsports to verify that they will work together. Although AF1 Motorsports has thousands of satisfied customers, user should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. AF1 Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AF1 Motorsports products, user agrees that should damages occur, AF1 Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AF1 Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AF1 Motorsports. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AF1 Motorsports will warranty only parts provided by AF1 Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AF1 Motorsports. AF1 Motorsports parts and products are not warrantied if item was not installed properly, misused, or modified

Remove the roof of the vehicle and place the double-sided tape on the side tubes shown in the image
Attach the side supports to the sides of the roof and attach them with 1/4″ x 1″ screws and 1/4″ nuts (provided in the package) as shown in the image.
Place the 1/4” x 1 1/2” screw, 1/4“ x 1” screw and 1/4” nuts (provided in the package) into the holes in the ceiling, as shown in the image.

Customer Service

Now you have completed the installation
For technical support, Please write us to :
info@afxmotorsports.com or call us at:
Ph : 956-242-6521
4610Modren lane, laredo, TX 78041
**This Product is for off Road use only

**