Shenzhen Weiyucheng Technology WY-030 Bluetooth Keyboard User Manual

Product electrical parameters

1. Bluetooth 3.0 standard interface
2. Effective operating distance: within 10 meters
3. OperatingVoltage:3.34.2V
4. Long-term working hours: more than 72 hours
5. Charging time: within 5 hours
6. Battery capacity 150mA11 Charging method: external USB standard

Detailed description of

1. keyboard device name Bluetooth Keyboard

2. match code
   • Enter the code mat chi ng mode
   • Long press the pairing key for 2s to enter the pairing
   • The code dwell time is 3min
   • Exit the pairing mode
   • Exit immediately after successful code matching
   If the code fails to enter deep sleep

3. Status light
   • Power on: the blue Power light stays on for 2-3s
   • Pairing: blue Bluetooth light flashes at 1Hz for 3min
   • Upper and lower case light: When working normally, the blue CAPS light indicates the upper and lower case status
   • When the battery voltage is lower than  about 3.3V, the blue Power light flashes twice quickly, with an interval of 1 second, and then flashes twice quickly, indicating that the battery voltage is low and needs to be charged；
   • Charging prompt: During charging, the red Charge light is on when charging is complete, the red Charge light is off；
   • When the battery voltage is lower than the shutdown voltage by about 3V, the keyboard will automatically disconnect from the Host, and then enter deep sleep (drop mode). ）

4. hibernate
   • first level dormancy
   • No action for 3s, enter the first level sleep
   • Support button wake-up
   Deep sleep (drop mode)
   • Support but t on wake-up

5. special function keys
   • Fn combines the buttons with a blue silkscreen, that is, the function of blue silkscreen
   • is realizedFn+Q， Fn+W， Fn+E， Switch to Android, Windows, and IOS systems respectively.
   • Ther e ar e t wo l I nes in the f I r st l I ne of blue silkscreen of which the upper

Bluetooth keyboard connection operation steps

1. Pul l the power but t on of the keyboard to the “ON” position, the power indicator light will be on for 2-3 seconds, then off。
   Press the “CONNECT” connection key of the keyboard, the Bluetooth connection indicator will flash, then the keyboard Bluetooth has been activated and can be connected to the tablet.

2. Turn on and unlock the tablet, and tap the tablet Settings icon.

3. Select “Bluetooth” in the “Settings” interface, enter the Bluetooth setting interface, click the Bluetooth switch and

4. The tablet will search for activated Bluetooth devices, find the wireless keyboard signal, click this item to connect.

5. Enter the PIN pairing code displayed on the screen on the keyboard and press the “Enter” key to connect.

6. After pairing is complete, the status of the wireless keyboard will show as “Connected”

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>