AFX MOTORSPORTS DEF040 Front Bumper Installation Guide
- June 11, 2024
- AFX MOTORSPORTS
Table of Contents
AFX MOTORSPORTS DEF040 Front Bumper
Product Information
Front Bumper for Can Am Defender 2018-2022
This product is designed for off-road use only and is manufactured by AFX Motorsports. The package includes a front bumper and necessary hardware such as (4x) 5/16 x 1 Bolt and (4x) 5/16 Lock nut. The product is compatible with Can Am Defender models from 2018 to 2022.
For any queries related to the product, you can contact AFX Motorsports at [email protected].
Product Usage Instructions
- Remove the plastic grill mesh from the front of the vehicle.
- Using an Allen key and combination wrench, remove the two bolts on the front of the vehicle.
- Place the bumper on the front of the vehicle and align the mounting holes in the bumper to the holes on the vehicle.
- Use (4x) 5/16 x 1 Bolt to secure the bumper in place.
- Attach the plastic grill mesh back to the vehicle.
- Fasten the hardware using (4x) 5/16 Lock nut.
Please note that this product is for off-road use only. AFX Motorsports is not liable for any damages or injuries caused by the misuse of this product.
THANK YOU!
FOR PURCHASING AT AFX MOTORSPORTS
HOW TO INSTALL
Pieces included:
Hardware:
- (4x) 5/16” x 1” Bolt
- (4x) 5/16” Lock nut
Tools needed (Not included)
- Allen Key.
- Combination Wrench.
Liability Statement
AFX Motorsports products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AFX Motorsports and is not recommended. AFX Motorsports products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact AFX Motorsports to verify that they will work together. Although AFX Motorsports has thousands of satisfied customers, user should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. AFX Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AFX Motorsports products, user agrees that should damages occur, AFX Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AFX Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AFX Motorsports. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AFX Motorsports will warranty only parts provided by AFX Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AFX Motorsports. AFX Motorsports parts and products are not warrantied if item was not installed properly, misused, or modified.
- Remove the plastic grill mesh from the front of the vehicle.
- Remove the two bolts on the fornt of the vehicle
- Place the bumper on the front of the vehicle. Align the mounting holes in the bumper to the holes ont the vehicle. Use (4x) 5/16” x 1” to secure the bumper.
- Attach the plastic grill mesh back to the vehicle. Fasten the hardware
For technical support , please write us to:
[email protected] or call us at:
Ph. 956-242-6521
www.afxmotorsports.com
4610 Modern Lane, Laredo, TX 78041 Ph.
956-242-6521