CL LIGHTING FWWDA3-15 WiFi Spherical Atmosphere Lamp User Manual
- June 5, 2024
- CL LIGHTING
Table of Contents
CL LIGHTING
FWWDA3-15 WiFi Spherical Atmosphere Lamp
User Manual
Product features
| Wi-Fi and Bluetooth connection APP control, the APP work with both Android
and IOS system
---|---
| Intelligent speaker control
| Timer switch function
| Music function:
External microphone with voice receiver
| Various color adjustment
| 1-100%: Stepless dimming 1-100%
| Elegant design
Parameter
| Model No | Color | Voltage | Power |
|---|---|---|---|
| FWWDA3-15 | RGBWW | 5Vdc | 3W |
Product Dimension
Wiring diagram
-
ON/OFF/mode switch button: Turn ON/Turn OFF/mode switch
Long press for over 5 seconds to reset -
Plug and unplug the USB to power on/off
Continual plug and unplug the USB 3 times to reset the USB DC5V input voltage -
304 switch button
Continual turn on/off the 304 switch button 3 times to reset
Attention
- Do not put any metal around the controller, the metal will block the WiFi signals
- Make sure the input voltage and the wiring are correct
- The output voltage must be the same as the working voltage of the ambient lamp, such as DC5V
Download APP
-
Search the APP- “SMART LIFE” from Apple Store or Google Play.
-
Scan the QR code from the label or user manual.
https://smartapp.tuya.com/smartlife
The APP is compatible with Android 5.0 and IOS10.0 or higher versions.
Log in/Register an account
Open the APP – “Smart Life”, sign up for a new account or log in with an existing account.
APP connection
-
Preparation jobs: Power on the LED strip and enter the home of the APP, please make sure your mobile and the smart kits are connected to the same WIFI
-
Connect the LED strip:
Solution (1: The LED strip will flash after powered on, tap the button “Add all devices” on the APP. The APP will popup an interface with tips about the info of the LED strip, tap the “Add” button, it will snows the interface of “Bluetooth devices”, then tap the “+” to the next interface and log in with the WiFi password, the devices turn to connecting automatically, just wait untill pairing success and tap “Done” to enter into the mode control interface. (If solution 1 is not suitable for your devices, please try solution 2)
Solution 2): The LED strip will
flash after powered on, tap the button “Add all devices” on the APP. Enter
into the interface of “Add manually” and choose “Lighting” then the
corresponding “LED strip”, we will turn to the interface of devices pairing,
log in the correct WiFi name and password, and tap “Next” (make sure all
devices should be connected to same WiFi). Make sure the LED strip is under
quick flash status, then tap “Next” to start pairing. Just wait untill pairing
success and tap “Done” to enter into the mode control interface
-
When the LED strip does not blinks after being powered on. Please press the function button for over 5 seconds, then the light turns to quick flash, enter into the APP and choose to add all the devices in the corresponding room in the APP. Enter into the interface of the add lighting device and match the LED strip
Interface introduction
-
You can adjust the brightness and CCT under white light mode.
-
Under color light mode, you could change to any RGB mixed color and adjust the brightness and saturability.
-
Under scene mode, various scenes are available for options, you can also DIY your preferable scenes. Under the music sync mode, the lights could synchronize change with the rhythm of music or voice that the smart devices received or detected.
The UI is for reference only, please
subject to the latest UI of the APP downloaded on your mobile phone.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum distance of 20cm on the
radiator of your body: Use only the supplied antenna.
FCC ID: 2AUEPFWWDA3-15
Documents / Resources
| CL
LIGHTING FWWDA3-15 WiFi Spherical Atmosphere
Lamp
[pdf] User Manual
FWWDA3-15, FWWDA315, 2AUEPFWWDA3-15, 2AUEPFWWDA315, WiFi Spherical Atmosphere
Lamp, FWWDA3-15 WiFi Spherical Atmosphere Lamp
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>