AFX MOTORSPORTS CAN050 Roof Rack Instruction Manual

October 30, 2023
AFX MOTORSPORTS

CAN050 Roof Rack
Instruction Manual

AFX MOTORSPORTS CAN050 Roof Rack

ROOF RACK
INSTALLATION MANUAL
CAN AM DEFENDER
4 SEATER CAN050

CAN050 Roof Rack

THANK YOU!

FOR PURCHASING AT AFX MOTORSPORTS
THE ROOF RACK CAN050 CAN ONLY BE INSTALLED OVER THE AFX ALUMINUM ROOF TEC012
HOW TO INSTALL

AFX MOTORSPORTS CAN050 Roof Rack - HOW TO INSTALL

  • (52x) 1/4” x 1/2” Screw
  • (16x) 1/4” Washer
  • (60x) 1/4” Lock nut
  • (8x) 1/4” x 1” Screw

Tools Needed (Not Included)

  • 5/32” Allen Key
  • 7/16” or 14 mm Combination Wrench

Liability Statement
AFX Motorsports products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AFX Motorsports and is not recommended. AFX Motorsports  products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact AFX Motorsports to verify that they will work together. Although AFX Motorsports has thousands of satisfied customers, user should be aware that  installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. AFX Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AFX  Motorsports products, user agrees that should damages occur, AFX Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AFX Motorsports, nor any 3rd party, will not be held responsible for any direct,  indirect, incidental, special, or consequential damages that result from any product purchased from AFX Motorsports. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the  product that gave rise to the claim. AFX Motorsports will warranty only parts provided by AFX Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AFX Motorsports. AFX  Motorsports parts and products are not warrantied if item was not installed properly, misused, or modified.

  1. Assemble the Front of the roof rack with the Front angle plates (as it is shown in the image). Use four 1/4 x 1/2” screws with nuts. (Do not tighten yet)AFX MOTORSPORTS CAN050 Roof Rack - HOW TO INSTALL1
  2. Assemble the Rear of the roof rack with the Rear angle plates (as it is shown in the image). Use four 1/4 x 1/2” screws with nuts. (Do not tighten yet)AFX MOTORSPORTS CAN050 Roof Rack - HOW TO INSTALL2
  3. Assemble the Front angle plates with the laterals (as it is  shown in the image). Use four 1/4 x 1/2” screws with nuts. (Do not tighten yet)AFX MOTORSPORTS CAN050 Roof Rack - angle plates
  4. Assemble the Rear angle plates with the laterals (as it is shown in the image). Use four 1/4 x 1/2” screws with nuts. (Do not tighten yet)AFX MOTORSPORTS CAN050 Roof Rack - angle plates1
  5. Align 9 central bars with the perforations. Use thirty six 1/4” x 1/2” screws with nut, inserting them bottom-up. (Do no tighten yet)AFX MOTORSPORTS CAN050 Roof Rack - angle plates 2
  6. Remove the eight screws of the roofAFX MOTORSPORTS CAN050 Roof Rack - angle plates3
  7. With the Help of another person, place the complete rack over  the AFX ROOF (TEC012) and aligning the perforations. Use eight 1/4” x 1” screws with nut and washers, tighten all the screwsAFX MOTORSPORTS CAN050 Roof Rack - angle plates4
  • For safety tighten all the screws
    * First tighten the screws on the sides, front and rear roof rack to align with the perforations in the roof, and then the central bars

    1. The three long perforations located on the laterals are for assemble mounting accessories, such as the Universal Accessory Mounting System Kit (HER018) (Not included), ideal for transporting Gas Tanks, Antennas, Tools and moreAFX MOTORSPORTS CAN050 Roof Rack - angle plates5

For technical support , please write us to:
[email protected] or
call us at: Ph. 956-242-6521
HAVE FUN AND A SAFE RIDE! www.afxmotorsports.com
4610 Modern Lane, Laredo, TX 78041 Ph. 956-242-6521
THIS PRODUCT IS FOR OFF ROAD USE ONLY

Documents / Resources

| AFX MOTORSPORTS CAN050 Roof Rack [pdf] Instruction Manual
CAN050 Roof Rack, CAN050, Roof Rack, Rack
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

AFX MOTORSPORTS User Manuals

Related Manuals