SB-PFRDC200S PEC FLY, Rear DELT Combo Machine Owner’s Manual

****

SB-PFRDC200S PEC FLY, Rear DELT Combo Machine

Product Information

The SB SB-PFRDC200S is a Fitness Equipment that combines PEC FLY and REAR DELT exercises. It comes with an Owner’s Manual and Assembly Guide.

Parts List and Part Numbers
The weight stack frame assembly (5) needs to be installed to the main frame assembly upright and seat mount (1). The rubber foot (3) can be installed at this time (optional). Back and seat cushions (27 & 28) need to be installed, along with front and rear weight stack guards (25 & 26). Finally, install the weight stack cable and ensure that the screws at each joint of the weight stack cable are fully tightened.

Product Description, Specs, & Features

• Model: SB-PFRDC200S
• Weight: 83848
• Dimensions: 121
• Features: PEC FLY / REAR DELT combo machine

Product Usage Instructions

1. Install the weight stack frame assembly (5) to the main frame assembly upright and seat mount (1). Install rubber foot (3) if desired.
2. Install back and seat cushions (27 & 28).
3. Install front and rear weight stack guards (25 & 26).
4. Install the weight stack cable, ensuring that the screws at each joint of the weight stack cable are fully tightened.
5. Use the machine to perform PEC FLY and REAR DELT exercises as desired.

PARTS DIAGRAM EXPLODED VIEW

PARTS LIST AND PART NUMBERS

INSTALLATION DETAILS

STEP 1:
ATTACH THE WEIGHT STACK FRAME ASSEMBLY(5) TO THE MAIN FRAME ASSEMBLY UPRIGHT AND SEAT MOUNT(1). INSTALL THE RUBBER FOOT PADS AT THIS TIME. (OPTIONAL).

STEP 2:

1. INSTALL GUIDERODS(7) INTO HOLES LOCATED INSIDE BOTTOM OF WEIGHT STACK FRAME.
2. SLIDE #32 SPACERS ON FROM TOP OF GUIDE RODS TO HAVE 2 ON EACH GUIDE ROD AT THE BOTTOM.
3. INSTALL WEIGHT PLATES(29). SMALLEST WEIGHT PLATE IS LAST AS THIS IS THE TOP PLATE.
4. INSTALL #27 ON TO GUIDE ROD AND INTO TOP PLATE.
5. INSTALL SELECTOR ROD(28) INTO WEIGHT STACK CENTER HOLE.
6. SECURE TOP OF GUIDE RODS TO WEIGHT STACK FRAME USING #9 PLATE AND #17 BOLTS.
7. PLACE SELECTOR PIN(30) INTO WEIGHT STACK.

REFER TO PAGE 7 & 8 FOR FURTHER ASSISTANCE

STEP 3:
INSTALL THE ARMS(2) AS SHOWN IN DIAGRAM USING #14 AND #15 BOLTS TO THE MAIN FRAME ASSEMBLY. LOOP THE CABLE STARTING ON THE CAM CONTAINING SELECTOR HOLES DOWN AND AROUND THE PULLEY ATTACHED TO THE TOP PLATE AND BACK TO THE OPPOSITE CAM CONTAINING THE SELECTOR HOLES.

STEP 4:
INSTALL BACK AND SEAT CUSHIONS(27 & 28). INSTALL FRONT AND REAR WEIGHT STACK GUARDS(25 & 26).

APPENDIX 1:
ORIENTATION DISTINGUISHING METHOD OF COUNTERWEIGHT SHEET.

APPENDIX 1:
INSTALLATION SEQUENCE OF COUNTERWEIGHT.

INSTALL WEIGHT STACK CABLE

PRODUCT DESCRIPTION, SPECS, & FEATURES

SB FITNESS EQUIPMENT/SB-PFRDC200S

• PRODUCT NAME: PEC FLY/REAR DELT COMBO MACHINE
• WEIGHT STACK: 200LB
• PRODUCT FEATURES: PECK FLY AND REAR DELT
• PRODUCT DIMENSIONS: 47.75″ W X 45″ L X 81.5″ H
• MUSCLES WORKED: PECTORALIS MINOR, ANTERIOR DELTOID, REAR DELTOID, TRAPEZOID, RHOMBOIDS MAJOR AND RHOMNOIDS MINOR, UPPER LATISSIMUS DORSI

FOR YOUR SAFETY

1. CONSULT YOUR PHYSICIAN OR HEALTH CARE PROVIDER BEFORE USING YOUR MACHINE AND/OR EXERCISE EQUIPMENT.
2. IF YOU HAVE A PHYSICAL DISABILITY OR AN ATHLETIC DISABILITY, IT IS REQUIRED THAT YOU CONSULT YOUR PHYSICIAN OR HEALTH CARE PROVIDER BEFORE PROCEEDING WITH ANY EXERCISE PROGRAM.
3. BEFORE USING THIS PRODUCT, PLEASE READ THIS MANUAL CAREFULLY. SB FITNESS EQUIPMENT IS NOT RESPONSIBLE FOR ANY PERSONAL INJURY OR DAMAGE CAUSED BY USING THIS PRODUCT UNDER ANY CIRCUMSTANCES OR NEGLIGENCE CAUSED BY THE USER.

ASSEMBLY INSTRUCTIONS AND PROCEDURES

1. THE PURPOSE OF THIS SECTION OF THE USER MANUAL IS TO ENSURE THAT THE MACHINE CAN BE INSTALLED EASILY AND CORRECTLY. PLEASE FOLLOW INSTRUCTIONS CAREFULLY AND ENTIRELY.
2. BECAUSE OF ITS LARGE SIZE AND WEIGHT, THE MACHINE SHOULD BE ASSEMBLED NEAR THE LOCATION WHERE IT WILL BE USED.
3. PLACE ALL PARTS OF THE MACHINE IN THE ASSEMBLY AREA AND REMOVE ALL PACKING MATERIAL. DO NOT DISCARD THE PACKAGING MATERIAL UNTIL THE ASSEMBLY IS COMPLETE.
4. ALL BOLTS MUST BE TIGHTENED DURING ASSEMBLY UNLESS OTHERWISE SPECIFIED, AND ALL BOLTS MUST BE TIGHTENED AFTER ASSEMBLY, IN ORDER FOR ASSEMBLY TO BE COMPLETE.
5. WHEN ASSEMBLING THE SB-PFRDC200S MAKE SURE THAT ALL PARTS ARE ASSEMBLED ACCORDING TO THE ASSEMBLY DIAGRAM.

WARRANTY INFORMATION

WHAT IS COVERED BY SB
SB FITNESS WARRANTS TO THE ORIGINAL PURCHASER OF THIS MACHINE THAT THE FRAME OF THE PRODUCT SHALL BE FREE FROM DEFECT IN MATERIALS AND WORKMANSHIP AND UNDER WARRANTY FOR A PERIOD OF TWO YEARS FROM THE DATE OF PURCHASE. ALL OTHER PARTS AND COMPONENTS OF THE PRODUCT SHALL BE FREE FROM DEFECT IN MATERIAL AND WORKMANSHIP AND UNDER WARRANTY FOR A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE WHEN THE PRODUCT IS USED AS RECOMMENDED BY SB FITNESS UNDER NORMAL USES AND CONDITIONS. DURING THE WARRANTY PERIOD SB FITNESS WILL AT NO ADDITIONAL CHARGE TO YOU, REPAIR OR REPLACE (AT SB FITNESS’ OPTION) THE FRAME OR ANY PART OF THE PRODUCT IF IT BECOMES DEFECTIVE, MALFUNCTIONS, OR OTHERWISE FAILS TO CONFORM WITH THIS LIMITED WARRANTY. ALL LABOR SHALL BE THE RESPONSIBILITY OF THE OWNER.

WHAT IS NOT COVERED
THIS LIMITED WARRANTY APPLIES ONLY FOR PRODUCT SOLD IN THE UNITED STATES UNDER THE SB FITNESS BRAND NAME. THIS WARRANTY DOES NOT COVER NORMAL WEAR AND TEAR ON ITEMS SUCH AS. BUT NOT LIMITED TO, TRANSPORTATION WHEELS, FOOT PEDALS, RUBBER GRIPS. PLASTIC END CAPS.

SCRATCHED PARTS, BROKEN
COVERS, COSMETIC DAMAGE, AND EXCLUDES PAINT & FINISH. WEAR ITEMS PERTAIN TO COMPONENTS THAT MIGHT NEED TO BE REPLACED DUE TO WEAR AND TEAR RESULTING FROM NORMAL USAGE.THIS WARRANTY IS VOID IF THE PRODUCT IS IMPROPERLY STORED, ASSEMBLED. ALTERED AND/OR MODI- FIED IN ANY WAY. MISUSED. ABUSED, IS SUBJECT TO ACCIDENT, IS IMPROPERLY MAINTAINED, AND THIS WARRANTY DOES NOT COVER REPAIR FOR ANY NOISES SUCH AS: SQUEAKS. CLUNKS, THUMPS RESULTING FROM POOR OR LACK OF PREVENTIVE MAINTENANCE. THIS LIMITED WARRANTY DOES EXTENT TO ANY PRODUCT THAT IS DAMAGED OR RENDERED DEFECTIVE;(A) AS A RESULT OF ACCIDENT, MISUSE. OR ABUSE:(B) USE WITH THE PRODUCT OF ANY PART NOT MANUFACTURED OR SOLD BY SB FITNESS; (C) BY MODIFICATION OF THE PRODUCT; (D) BY NORMAL WEAR AND TEAR: (E) OPERATION USING INCORRECT PO WER SUPPLIES; OR (F) AS A RESULT OF SERVICE BY ANYONE OTHER THAN SB FITNESS. OR AN AUTHORIZED SB FITNESS SERVICE PROVIDER.

ASSUMPTION OF RISK

WARNING
THIS PRODUCT HAS BEEN MANUFACTURED WITH SAFETY IN MIND. WARRANTY APPLIES ONLY WHEN USED AS INSTRUCTED. FAILURE TO COMPLY WITH THE WARNINGS AND PRECAUTIONS DESCRIBED IN THIS DOCUMENT MAY CAUSE PERSONAL INJURY AND RESULT IN WARRANTY BEING VOIDED. PLEASE NOTE THAT SB FITNESS ASSUMES NO RESPONSIBILITY FOR ANY ACCIDENTS RESULTING FROM USE.

CALIFORNIA PROPOSITION

65 WARNING

WARINING:
THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS INCLUDING ARSENIC, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER. FOR MORE INFORMATION, GO TO WWW.P65WARNINGS.CA.GOV.XN–IVG.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>