AFX MOTORSPORTS CAN006 Sport Roof Rack Installation Guide

: October 30, 2023
: AFX MOTORSPORTS

Table of Contents

HOW TO INSTALL
Liability Statement
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

MOTORSPORTS CAN006 Sport Roof Rack
Installation Guide AFX MOTORSPORTS CAN006 Sport Roof
Rack

THANK YOU!
FOR PURCHASING AT AFX MOTORSPORTS

HOW TO INSTALL

Pieces included:

AFX MOTORSPORTS CAN006 Sport Roof Rack - Description

Hardware:
(28x) 3/16” x 1/2″ Bolts with nuts.
a (20x) 1/4” x 1/2” Bolts with nuts.
(6x) 1/4” x 1” Bolts with nuts.
Tools needed (Not Included):

5/32″ Allen Key.
7/16” Combination Wrench.

Liability Statement

AFX Motorsports products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AFX Motorsports and is not recommended. AFX Motorsports products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact AFX Motorsports to verify that they will work together. Although AFX Motorsports has thousands of satisfied customers, user should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. AFX Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AFX Motorsports products, user agrees that should damages occur, AFX Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AFX Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AFX Motorsports. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AFX Motorsports will warranty only pads provided by AFX Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AFX Motorsports. AFX Motorsports parts and products are not warrantied if item was not installed properly, misused, or modified.

Install rear frame assembly onto rear side rails (as it is shown in the image). Use four 1/4x 1/2” screws with nut. (Do not tighten yet).
Align 3 central rails with the perforations (as it is shown in the image). Use twelve 1/4” x 3/4” screws with nut, inserting them bottom-up. (Do no tighten yet)
Install Front frame Assembly onto front side rails (as it is shown in the image). Use four 1/4 x 1/2” screws with nut (Do not tighten yet).
Align 3 central rails with the perforations (as it is shown in the image). Use sixteen 1/4” x 3/4” screws with nut, inserting them bottom-up. (Do not tighten yet).
Place the rear rack assembly with the front rack assembly, aligning the Bracket #1 with the perforations (as it is shown in the image), using eight 1/4 x 1/2” screws with nut. (Do not tighten yet).
Align the last central rail with the perforations of the Bracket #3 (As it is shown in the image). Use four 3/16 x 3/4” screws with nut, inserting them bottom-up.
To finish with the installation, settle the whole rack over the roof, use six 1/4 x 1″ screws with washer and nut (as it is shown in the image).* For safety tighten all the screws.