AFX MOTORSPORTS POR013 Spare Tire Carrier Instruction Manual
- June 11, 2024
- AFX MOTORSPORTS
Table of Contents
AFX MOTORSPORTS POR013 Spare Tire Carrier
Product Information
The Spare Tire Carrier for Polaris RZR Turbo R is a product designed for off- road use only. It comes with a main grill, spare tire carrier, support bracket, clamps, hydraulic piston, and locks. The installation process involves using various bolts, lock nuts, washers, and tools such as a screwdriver torx key set, 5/32 Allen key, and 7/16 combination wrench.
Note that during the installation process, you should not fully tighten the bolts and nuts until the end of the installation. Also, if your vehicle has a 5 point seat belt, you need to remove the screws and bolts to attach the support bracket.
WHAT’S INCLUDE
Pieces included:
Hardware:
- (10x) 3/8” x 1” Bolt
- (10x) 3/8” Lock nut
- (10x) 3/8” Flat Washer
- (8x) 5/16” x 1” Bolt
- (8x) 5/16” Lock Nut
- (2x) 6mm x 50mm
- (2x) 1/4” Flat washer
- (8x) 1/4” x 1-1/2” Bolt
- (8x) 1/4” Lock Nut
Tool needed:
- Screwdriver
- Torx Key Set (T30, T25, T40)
- 5/32” Allen Key.
- 7/16” Combination Wrench.
*During the installation do not fully tighten the bolts and nut. Tighten all the hardware until the and of the installation.
INSTALLATION INSTRUCTION
*During the installation do not fully tighten the bolts and nut. Tighten all the hardware until the and of the installation.
- Remove both of the screws placed in the center with a torx key L.
- If your vehicle has a 5 point seat belt, remove the screws and bolts to attach the soport bracket.
- Attach the Support Bracket to your vehicle. Use 2 bolts of 3/8” x 1” with plain washer and 2 lock nuts to attach the outside of the support bracket to the vehicle. To secure the center of the bracket use two 6mm x 50mm bolts.
- Join the support bracket to the main grill. Use two bolts with lock nuts (3/8”x1”) Do not tighten the bolts completely.
- Attach the hydraulic pistons to the vehicle one to each side. Use the original bolts that come with the vehicle.
- Lift the Main Grill to secure the hydraulic pistons to the main grill. Use two bolts with lock nuts (3/8”x1”) Do not tighten the bolts completely.
- Attach the Left and Right Lock to the main grill. Use 4 bolts and lock nuts for each lock (1/4” x 1-1/2”)
- Place the spare tire carrier on the center of the main grill. Secure the spare tire carrier with 4 bolts and lock nuts (3/8” x 1”)
- Place the Clamps on the Vehicle. Use 5/16” x 1“ bolts and lock nuts. Make sure the clamp aligns to the lock in the main grill.
- Tighten all the hardware
- Place the Spare tire over the spare tire carrier and secure with 3 wheel nut lugs.
Liability Statement
AF1 Motorsports products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AF1 Motorsports and is not recommended. AF1 Motorsports products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact AF1 Motorsports to verify that they will work together. Although AF1 Motorsports has thousands of satisfied customers, user should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. AF1 Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AF1 Motorsports products, user agrees that should damages occur, AF1 Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AF1 Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AF1 Motorsports. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AF1 Motorsports will warranty only parts provided by AF1 Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AF1 Motorsports. AF1 Motorsports parts and products are not warrantied if item was not installed properly, misused, or modified.
For technical support , please write us to:
info@afxmotorsports.com or call us at:
Ph. 956-242-6521
www.afxmotorsports.com
4610 Modern Lane, Laredo, TX 78041
Ph. 956-242-6521
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>