AFX MOTORSPORTS DEF042 Rear Bumper Instruction Manual

: June 11, 2024
: AFX MOTORSPORTS

Table of Contents

DEF042 Rear Bumper
Product Information
Product Usage Instructions
HOW TO INSTALL
Liability Statement
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

DEF042 Rear Bumper

AFX-MOTORSPORTS -DEF042-Rear-Bumper-product-image

Product Information

The AFX Motorsports Rear Bumper is designed for off-road use only and is compatible with the Can Am Defender models from 2018-2022. The package includes one front bumper, one left bumper bracket, one right bumper bracket, and two metal plates. The necessary hardware for installation is also included, which comprises four 3/8 x 1 bolts and lock nuts and four 5/16 x 3 bolts and lock nuts. The user manual provides detailed instructions on how to install the rear bumper.

Product Usage Instructions

Using a 5/16 drill bit, drill four holes (two on each side) through the bed to install the rear bumper.
Locate the existing stock holes in the frame rail.
Attach the left and right bumper brackets using two 5/16 x 3 bolts on each side.
Attach the metal plates to the bumper brackets using two 3/8 x 1 bolts and lock nuts on each side.
Attach the rear bumper to the rear bumper brackets using two 3/8 x 1 bolts and two lock nuts on each side.
Secure all bolts.

Please note that a combination wrench is required for installation, which is not included in the package. If you have any questions or concerns about the installation process, please contact AFX Motorsports at info@afxmotorsports.com.

HOW TO INSTALL

Pieces included:

AFX-MOTORSPORTS -DEF042-Rear-Bumper-01

Tools needed (Not included):

Drill: 5/16” Drill bit Combination Wrench.

Liability Statement

AFX Motorsports products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AFX Motorsports and is not recommended. AFX Motorsports products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact AFX Motorsports to verify that they will work together. Although AFX Motorsports has thousands of satisfied customers, user should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. AFX Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AFX Motorsports products, user agrees that should damages occur, AFX Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AFX
Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AFX Motorsports. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AFX Motorsports will warranty only parts provided by AFX Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AFX Motorsports. AFX Motorsports parts and products are not warrantied if item was not installed
properly, misused, or modified.

To install the rear bumper you need to drill 4 (5/16”) holes up through the bed (Two on each side).
Locate the existing stock holes in the frame rail.
Use two (5/16” x 3”) bolts on each side to secure the bumper brackets to the vehicle.
Attach the Rear Bumper to the Rear bumper brackets. Use 2 (3/8” x 1”) bolts with 2 lock nut on each side.
Secure all the bolts