AFX MOTORSPORTS CAN008 Sport Roof Rack Installation Guide
- October 30, 2023
- AFX MOTORSPORTS
Table of Contents
ROOF RACK
INSTALLATION MANUAL
Polaris XP 1000 2 Seater
CAN008
CAN008 Sport Roof Rack
THANK YOU!
FOR PURCHASING AT AFX MOTORSPORTS
SPORT ROOF RACK
HOW TO INSTALL
Pieces included:
Hardware:
(4x) 1/4” x 1” Bolts with washers and nuts.
• (8x) 1/4’ x 1/2” Bolts with nuts.
(12x) 3/16” x 1/2” Bolts with nuts.
Tools needed (Not Included):
• 5/32” Allen Key.
• 7/16” Combination Wrench.
Liability Statement
AFX Motorsports products are designed to best fit user’s ATV/UTV under stock
conditions. Adding, modifying, or fabricating any factory or aftermarket parts
will void any warranty provided by AFX Motorsports and is not recommended. AFX
Motorsports products could interfere with other aftermarket accessories. If
user has aftermarket products on machine, contact AFX Motorsports to verify
that they will work together. Although AFX Motorsports has thousands of
satisfied customers, user should be aware that installing bumpers, rock
sliders, spare tire carriers, etc. will change the ride of machine and may
increase maintenance and part wear. Operating any off-road machine while, or
after, consuming alcohol and/or drugs increases risk of bodily harm or death.
No warranty or representation is made as to this product’s ability to protect
user from severe injury or death. AFX Motorsports urges operators and
occupants to wear a helmet and appropriate riding gear at all times. By
purchasing and installing AFX Motorsports products, user agrees that should
damages occur, AFX Motorsports will not be held responsible for loss of time,
use, labor fees, replacement parts, or freight charges. AFX Motorsports, nor
any 3rd party, will not be held responsible for any direct, indirect,
incidental, special, or consequential damages that result from any product
purchased from AFX Motorsports. The total liability of seller to user for all
damages, losses, and causes of action, if any, shall not exceed the total
purchase price paid for the product that gave rise to the claim. AFX
Motorsports will warranty only parts provided by AFX Motorsports. Any damage
or problems with OEM housings, bearings, seals, or other manufacturers’
products will not be covered by AFX Motorsports. AFX Motorsports parts and
products are not warrantied if item was not installed properly, misused, or
modified.
-
Place the upper corner with the lateral (as it is shown in the image). Use four 1/4x 1/2” screws with nut. (Do not tighten yet).
-
Place the frontal corner with the lateral (as it is shown in the image). Use four 1/4 x 1/2” screws with nut (Do not tighten yet).
-
Align 4 central bars with the perforations (as it is shown in the image). Use twelve 3/16 x 1/2” screws with nut, inserting them bottom-up and tighten all screws.
-
To finish settle the complete rack over the roof aligning the perforations. Use four 1/4 x 1” screws with nut and wahser (as it shown in the image).
- For safety tighten all the screws.
Now you have completed the installation.
For technical support , please write us to:
info@afxmotorsports.com or call us at:
Ph. 956-242-6521
HAVE FUN AND A SAFE RIDE!
www.afxmotorsports.com
4610 Modern Lane, Laredo, TX 78041 Ph. 956-242-6521
THIS PRODUCT IS FOR OFF ROAD USE ONLY
Documents / Resources
| AFX
MOTORSPORTS CAN008 Sport Roof
Rack
[pdf] Installation Guide
CAN008, Polaris XP 1000 2 Seater, CAN008 Sport Roof Rack, Sport Roof Rack,
Roof Rack, Rack
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>