SLV 1006353 ONE FL Straight LED Instruction Manual
- June 9, 2024
- SLV
Table of Contents
SLV 1006353 ONE FL Straight LED
Product Information
- Power supply: 220V-240V ~50/60Hz
- Power consumption: 22W
- Light output: 2700K: 1200 lm 3000K: 1200 lm
- Color Rendering Index (CRI): >90
- Weight: 10.5 kg
- Model variants: A, B (1006353, 1006354, 1006355)
Product Usage Instructions
- The installation of the product requires expert knowledge and must be carried out only by an approved electrician in compliance with local and national regulations.
- The light source of the luminaire can only be replaced by the manufacturer, an authorized service technician, or a qualified person.
- Disconnect the product from mains and let it cool down before cleaning external surfaces with a slightly moistened cloth. Store the product dry and clean.
- Place the product in a way that it poses no danger (e.g. stumbling).
- To put the product into service, connect the mains plug with the mains plug socket and check for secure standing and proper function.
INSTRUCTION MANUAL PART A
Floor lamp
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.
Operating Manual PART B
Floor Stand Luminaire
1006353 …54 …55
Read manual carefully and keep for further use!
Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Take out of service when suspecting a defect or malfunction and contact your
dealer or a qualified electrician.
Take measures that children get not harmed by the product.
If the external flexible cable or cord of this luminaire is damaged, it shall
be exclusively replaced by the manufacturer or a qualified electrician to
avoid hazard.
Do not stare into the active light source.
Additional safety advices =
Use as directed
Safety class II (2) – Safety insulated – Connection without protective
conductor.
Operate only on an even, stable and tilt-fixed surface.
Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.
Admissible ambient temperature(ta): -20°C …+45°C.
Light Source
The light source of this luminaire may only be replaced by the manufacturer,
an authorized service technician or a comparable qualified person.
This product contains a light source of the energy efficiency class F.
Reference control setting: 3000K
Care / Storage
Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
Placement
Place in a way that product poses no danger(e.g. stumbling).
Putting into service
Connect mains plug with mains plug socket.
Operation
Switching-on: Press push-button shortly when luminaire is switched off.
Switching-off: Press push-button long.
Selection of adjustments: Press push-button shortly when luminaire is
switched on.
Following adjustments are possible
Light color change
Selection of the lighting rings (top-bottom – both rings)
Brightness change
The luminaire has a storage function. The last settings are saved.
Turn the push-button to change the individual setting.
The light flashes when the minimum or maximum adjustment is reached.
Check for secure standing and proper function!
© 23.06.2022 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>