Ford Doors and Locks Keyless Entry Instructions

Ford Doors and Locks Keyless Entry

Product Information

Keyless Entry

The Keyless Entry feature allows users to lock and unlock their vehicle without using a traditional key. It utilizes a keypad located near the driver window, which is invisible until touched. The keypad lights up when touched, allowing users to enter their code and operate the following functions:

• Lock or unlock the doors
• Program and erase user codes
• Arm and disarm the anti-theft alarm

Users can operate the keypad with the factory-set five-digit entry code, or create up to five of their own personal entry codes. It is important to note that if the entry code is entered too fast, the unlock function may not work.

Product Usage: Keyless Entry

Programming a Personal Entry Code

1. Enter the factory-set code.
2. Press 1/2 within five seconds of entering the factory-set code.
3. Enter your personal five-digit code. Each number must be entered within five seconds of each other.
4. Press 1/2 to store the personal code. The doors will lock and then unlock to confirm that programming was successful.
5. To program additional personal entry codes, repeat Steps 1-3, then for Step 4, enter a different 1/2 control than previously used.

Note: Do not set a code that uses five of the same number or five numbers in sequential order. The factory-set code will work even if a personal code has been set.

Erasing a Personal Code

1. Enter the factory-set five-digit code.
2. Press 1/2 within five seconds of entering the factory-set code.
3. Press 7/8 and 9/0 simultaneously within five seconds of Step 2.
4. All personal codes will be erased, and only the factory-set five-digit code will work.

Unlocking and Locking the Doors

To unlock the driver’s door:

1. Enter the factory-set five-digit code or your personal code. Each number must be entered within five seconds of each other.
2. The interior lamps will illuminate.

Note: All doors will unlock if the two-stage unlocking feature is disabled.

To unlock all doors:

Enter the factory-set five-digit code or your personal code twice within five seconds.

To lock all doors:

• Press the 7/8 and 9/0 controls at the same time.

Note: The anti-scan feature will disable the keypad for one minute and flash its lamp if the wrong code is entered seven times in a row. The feature will turn off after one minute of keypad inactivity, pressing the unlock button on the remote control, switching the ignition on, or unlocking the vehicle using intelligent access.

SECURICODE™ KEYLESS ENTRY KEYPAD

The keypad is located near the driver window.It is invisible until touched and then it lights up so you can see and touch the appropriate buttons.

Note: If you enter your entry code too fast on the keypad, the unlock function may not work. Re-enter your entry code more slowly.

You can use the keypad to

• lock or unlock the doors
• program and erase user codes
• arm and disarm the anti-theft alarm.

You can operate the keypad with the factory-set five-digit entry code. The code is located on the owner’s wallet card in the glove box and is available from an authorized dealer. You can also create up to five of your own five- digit personal entry codes.

Programming a Personal Entry Code

To create your own personal entry code:

1. Enter the factory-set code.
2. Press 1·2 on the keypad within
3. Press 1·2 on the keypad to save personal code 1.

The doors will lock then unlock to confirm that programming was successful.

To program additional personal entry codes, repeat Steps 1-3, then for Step 4

• press 3·4 to save personal code 2
• press 5·6 to save personal code 3
• press 7·8 to save personal code 4
• press 9·0 to save personal code 5.

Tips

• Do not set a code that uses five of the same number.
• Do not use five numbers in sequential order.
• The factory-set code will work even if you have set your own personal code.

Erasing a Personal Code

1. Enter the factory-set five-digit code.
2. Press and release 1·2 on the keypad within five seconds.
3. Press and hold 1·2 for two seconds. This must be done within five seconds of completing Step 2.

All personal codes will erase and only the factory-set five-digit code will work.

Anti-Scan Feature

The keypad will go into an anti-scan mode if you enter the wrong code seven times (35 consecutive button presses). This mode disables the keypad for one minute and the keypad lamp will flash.

The anti-scan feature will turn off after:

• one minute of keypad inactivity
• pressing the unlock button on the remote control
• switching the ignition on
• unlocking the vehicle using intelligent access.

Unlocking and Locking the Doors

To Unlock the Driver Door

• Enter the factory-set five-digit code or your personal code. You must press each number within fifteen seconds of each other. The interior lamps will illuminate.

To Unlock All Doors

• Enter the factory-set code or your personal code, then press 3·4 control within five seconds.

To Lock All Doors

• Press and hold 7·8 and 9·0 at the same time with the driver door closed. You do not need to enter the keypad code first.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>