SLV 232055 Ceiling Light Instruction Manual
- June 9, 2024
- SLV
Table of Contents
SLV 232055 Ceiling Light
PRODUCT SPECIFICATION
- 220V-240V ~50/60Hz
- E27
- 60W max.
- Ø 14,5 x 23,3 cm
- 1,26 kg
TOOLS NEEDED
INSTALLATION INSTRUCTION
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
Read manual carefully and keep for further use!
- Safety advices for installation and operation.
- Disregard may lead to danger of life, burning or fire!
- Any works on the electrical connection only by electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Operate only with intact protection glass.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children get not harmed by the product.
- Additional safety advices
Use as directed
- Safety class I (1) – Connection with protective conductor.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Do not strain mechanically or expose to strong dirt contamination.
- IP44: Protection against foreign objects > Ø 1,0mm – Protection against splashing water from all directions.
Lamp replacement
- Disconnect luminaire from mains and let it cool down.
- Suitable light sources: E27, 60W max.
- Clean gasket when dirty
Care / Storage
- Disconnect product from mains and let it cool down.
- Clean external surfaces regularly with a slightly moistened (water) cloth.
- Do not clean with pressure washer.
- Openings providing aeration or drainage must be kept free.
- The following influences may have unwanted effects on the product: acidic surrounding, high salt content in the air, cleaning agents, fertilizer, thawing salt, chemicals.
- Store dry and clean.
Installation
- Switch off mains / fixed connection cable!
- Use only described accessories.
- Use only suitable fastening materials.
- Only suited for ceiling surface mounting.
- Follow local regulations for outdoor installations.
- Do not seal the product yourself (e.g. with silicone).
- Install according to declared IP type.
- Install as shown in the figure.
Electrical connection
- Direct the fixed wiring with its complete insulation at least 15 mm into the housing.
- Equip flexible wire ends with suitable wire ferrules!
- Live conductor Terminal L
- Neutral conductor Terminal N
- Protective conductor Earth terminal
- Up to 10 luminaires may be connected in one row.
Check secure fixation and proper function!
ABOUT COMPANY
- © 04.07.2022 SLV GmbH,
- Daimlerstr. 21-23,
- 52531 Übach-Palenberg,
- Germany,
- T
el. +49 (0)2451 4833-0. - Made in China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>