SDC 527 SARGENT 8800 and Arrow S1250 Seires Monitoring Switch Kit Installation Guide
- June 3, 2024
- SDC
Table of Contents
SDC 527 SARGENT 8800 and Arrow S1250 Seires Monitoring Switch Kit
INSTALLATION INSTRUCTIONS
- REMOVE ACCESS COVER FROM PUSH BAR.
- ATTACH SWITCH(ES) TO SWITCH PLATE AS SHOWN USING SUPPLIED SCREWS.
- SLIDE SWITCH ASSEMBLY INTO OPEN END OF ACCESS COVER ALL THE WAY THROUGH TO THE OTHER END.
- INSERT AND TIGHTEN PHILLIPS PAN HEAD SCREW LOCKING THE SWITCH ASSEMBLY IN PLACE.
- SLIDE ACCESS COVER WITH SWITCH ASSEMBLY BACK INTO PUSH BAR.
Applications
Remote Latch Status Monitoring: Retracting the latch by depressing the push pad provides an output signal for local or remote visual and audible annunciation indicating forced entry or unauthorized egress.
Access Control REX:
When connected to the Request-To-Exit input of a keypad, card or biometric Access Controller, depressing the pushpad and retracting the latch actuates the Latch Status contact, shunting the control access control alarm to permit authorized egress and/or releases the magnetic door lock for uninhibited egress.
Magnetic Lock Release
Where Access Controller with REX input is unavailable, the N/C contact of the switch is wired in series between the power supply and fail safe magnetic lock. Depressing the exit device pushpad retracts the latch, causing the contact to open, thereby releasing the magnetic lock for uninhibited egress.
Mantrap Logic
Provides N/O and N/C contacts required for 2 or more communicating doors for Interlock and Mantrap applications.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>