SDC TJ81 Top Jamb Mounting Kit Installation Guide
- March 4, 2024
- SDC
Table of Contents
**SDC TJ81 Top Jamb Mounting Kit Installation Guide
**
INSTALLATION INSTRUCTIONS
-
Place template against top of frame & door. Mark & drill holes according to template
-
Assemble Frame Bracket & Lock Mounting Bracket. Install onto top of frame.
-
Install Lock onto Frame Bracket assembly. Tighten integrated bolts to secure Lock in position.
-
Assemble Armature Brackets as shown, using a minimum of at least 1 Rubber Washer add additional if required. Install Armature Bracket Assembly onto door. Armature should just make contact with Lock. Adjust the offset of Armature Bracket as needed.
Final Assembly Diagram
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email engineer@sdcsecurity.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>