SDC 515 SARGENT 9000 Series Monitoring Switch Kit Installation Guide
- October 27, 2023
- SDC
Table of Contents
SDC 515 SARGENT 9000 Series Monitoring Switch Kit
WIRING SPECIFICATION
- WHT – COM
- YEL – N/O
- ORG – N/C
Applications
Remote Latch Status Monitoring: Retracting the latch by depressing the push
pad provides an output signal for local or remote visual and audible
annunciation indicating forced entry or unauthorized egress.
Access Control REX: When connected to the Request-To-Exit input of a
keypad, card or biometric Access Controller, depressing the pushpad and
retracting the latch actuates the Latch Status contact, shunting the control
access control alarm to permit authorized egress and/or releases the magnetic
door lock for uninhibited egress.
Magnetic Lock Release: Where Access Controller with REX input is
unavailable, the N/C contact of the switch is wired in series between the
power supply and fail safe magnetic lock. Depressing the exit device pushpad
retracts the latch, causing the contact to open, thereby releasing the
magnetic lock for uninhibited egress.
Mantrap Logic: Provides N/O and N/C contacts required for 2 or more
communicating doors for Interlock and Mantrap applications.