SDC 526 Corbin RUSSWIN ED8200 Monitoring Switch Kit Installation Guide
- June 3, 2024
- SDC
Table of Contents
526 Corbin RUSSWIN ED8200 Monitoring Switch Kit
SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM
[t] 800.413.8783 ■ 805.494.0622 ■ E-mail:
service@sdcsecurity.com ■ 801 Avenida Acaso,
Camarillo, CA 93012 ■ PO Box 3670, Camarillo, CA 93011
INSTALLATION INSTRUCTIONS
526
MONITORING SWITCH KIT
CORBIN RUSSWIN ED8200
Applications
Remote Latch Status Monitoring: Retracting the latch by depressing the push
pad provides an output signal for local or remote visual and audible
annunciation indicating forced entry or unauthorized egress.
Access Control REX: When connected to the Request-To-Exit input of a keypad,
card or biometric Access Controller, depressing the pushpad and retracting the
latch actuates the Latch Status contact, shunting the control access control
alarm to permit authorized egress and/or releases the magnetic door lock for
uninhibited egress.
Magnetic Lock Release: Where Access Controller with REX input is unavailable,
the N/C contact of the switch is wired in series between the power supply and
fail safe magnetic lock. Depressing the exit device pushpad retracts the
latch, causing the contact to open, thereby releasing the magnetic lock for
uninhibited egress. Mantrap Logic: Provides N/O and N/C contacts required for
2 or more communicating doors for Interlock and Mantrap applications.
Any suggestions or comments to this instruction or product are welcome. Please
contact us through our website or email
engineer@sdcsecurity.com
P:\INST INSTRUCTIONS\EGRESS CONTROLS\INST-526 REV C 07-21
Documents / Resources
| SDC
526 Corbin RUSSWIN ED8200 Monitoring Switch
Kit
[pdf] Installation Guide
526 Corbin RUSSWIN ED8200 Monitoring Switch Kit, 526, Corbin RUSSWIN ED8200,
ED8200, Monitoring Switch Kit, Switch Kit, Monitoring Kit, Kit
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>