GALENVS WW0024 Wastewater DNA-RNA Extraction Kit User Guide
- June 3, 2024
- GALENVS
Table of Contents
GALENVS WW0024 Wastewater DNA-RNA Extraction Kit.
INSTRUCTION
-
Add 10ml of wastewater to the appropriate wells of the 24-deep well Sample plate.
-
Add 100µl of Concentration Buffer.
-
Add 75µl of Concentration Beads.
-
Place the Sample plate and Lysis plate in their respective slots in the purification system, and start the WWKit – Part A protocol.
Place tip combs on the sample plate or in the dedicated tip plate, according to the machine’s specifications. -
When the protocol is complete, remove the Lysis plate from the purification system.
-
Discard the tip combs and other plates.
-
Add 600µl of Binding Buffer and
-
30µl Binding Beads to the Lysis plate.
-
Place Lysis, Wash #1, Wash #2, and Elution plates in their respective slots in the purification system, and start the WWKit – Part B protocol.
Place tip combs on the Lysis plate or in a dedicated tip plate, according to the machine’s specifications. -
When the protocol is complete, remove the Elution plate from the purification system.
-
Discard the tip combs and other plates.
Wastewater DNA/RNA Extraction Kit.