Smartwares CIP-39311 Outdoor IP Camera Instruction Manual
- June 10, 2024
- smartwares
Table of Contents
Smartwares CIP-39311 Outdoor IP Camera
PARTS DESCRIPTION
- Indication LED
- Infrared LEDs
- Camera Lens
- Microphone
- Spotlight
- Magnetic stand
- Backplate
- Reset button
- Micro SD-card slot
- USB power adaptor
- Speaker
Wireless technology: Wi-Fi
Operating frequency: 2,4 GHz
Max. radio-frequency power: 18.30 dBm
Information for power adapter:
Input: 100-240V 50/60Hz
Output: DC 5.0V 1A
BOX CONTENT
- Camera
- USB power adapter
- Installation tools
- Quick start guide
BEFORE THE FIRST USE
Optional: Inserting a MicroSD card (not included)
- First make sure your camera is not connected to the power adapter. Insert your Micro-SD card all the way in the MicroSD card slot on the camera. Only use a class 10 MicroSD card n(max 128GB).
- A MicroSD card is required for recording footage.
Download the app
- Download the Connected at Home app from the App store or Google Playstore.
- Alternatively, you can also use the Smart Life app.
INSTALLATION
-
Choose a location to place your camera and check if there is a strong 2,4 GHz Wi-fi signal.
-
Tip: Complete set up on app first before mounting the camera to the wall.
-
Remove the backplate from underneath the magnetic stand by pressing down on the backplate with your thumbs and turning the backplate anti-clockwise.
-
Mark the drill holes using the holes on the backplate as a guide. Also mark a drill hole of at least 1.5cm (in diameter) to lead the camera cable inside. The power adaptor must be plugged into an indoor socket.
-
Drill the holes and mount the backplate to the wall using the screws and plugs supplied.
Note: To prevent damage, before drilling, make sure that there are no wires or pipes located in the wall. -
Attach the magnetic stand to the backplate by aligning the grooves then turning the stand clockwise. To remove the magnetic stand from the backplate turn the stand anticlockwise.
-
Attach the camera to the magnetic stand and adjust the viewing angle as you desire.
-
Connect the adaptor to the USB power cable and plug in the camera to an indoor socket.
-
The camera will now start booting. This will take about 1 minute. Wait until the indication LED flashes white rapidly.
-
Open the Connected at Home or Smartlife app.
-
Register or log in with existing account.
-
Press + button to add the camera.
-
For Connected at home app: Choose the Outdoor camera CIP-39311.
-
For Smartlife app: Choose Smart camera (Wi-Fi)
-
Follow the instructions in the app to configure the camera.
-
Note: Only 2,4 GHz Wi-Fi network is supported.
Night Vision Options
The following options are available under “Night Mode” in the Apps.
-
Auto mode
When Auto mode is activated, the camera will automatically activate the Infrared LED when it is dark.
When the spotlight is set to ON, the camera will activate the white LED spotlight for 1 minute when movement is detected. -
Infrared mode
The camera will automatically activate the Infrared LED when it is dark. The images on your screen will be seen infrared (black and white).The white LED spotlight cannot be activated with this setting. -
Color Light mode
The camera will activate the white LED spotlight when it is dark. Note: The spotlight must be set to ON. When spotlight is set to OFF, night vision will not be activated.
TROUBLESHOOTING
Reset
If needed, you can reset your camera by pressing and holding the reset button
for at least 6 seconds. Note: One device can only be paired with one App
account at a time, if the device has already been paired with another account,
then it can’t be paired to a new account.
The device can be removed from the app account by deleting it from the app.
Camera LED indicator information
Solid white: Normal operation
Flashing slowly: Booting
Flashing rapidly: No internet connection
MORE INFORMATION
For more instructions and information, please visit our website,
www.smartwares.eu and search for “CIP-39311”.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>