luminii PDCU-W-96-24 Pure DC Universal Power Supply Instruction Manual

: June 21, 2024
: luminii

Table of Contents

luminii PDCU-W-96-24 Pure DC Universal Power Supply
Installation Instructions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

luminii PDCU-W-96-24 Pure DC Universal Power Supply

Specifications

Models: PDCU-W-96-24 & PDCU-W-3×94-24
Maximum Load: 3×96 watts

Dimensions

Length: 11.85″
Width: 4.32″
Depth: 1.81″
Net Weight: 5.2 lbs

Product Usage Instructions

Requirements:
Before installation, ensure the power supply has the correct input voltage, output voltage, and wattage. Refer to the label and wiring diagram for confirmation.

Mounting
The power supply can be mounted vertically or horizontally with a minimum clearance of 2 inches around it to allow proper air circulation.

Wiring Connections

Remove the two Phillips screws from the top of the driver housing to access the driver wires.
Insert the 120-277 VAC power and the 24V DC low voltage wires from the LEDs into the driver housing. Include the controller wire if applicable. Refer to the wiring diagram for proper connections.
Connect the wires using wire nut connections in the driver housing and close the housing cover securely with the two screws.

FAQ
Q: Can the power supply be installed by anyone?
A: No, the power supply should only be installed by a qualified electrician due to it being hardwired and requiring adherence to specific electrical codes.

PDCU-D Pure DC® Universal Power Supply

Installation Instructions

Models PDCU-W-96-24 & PDCU-W-3×94 -24

Please read all instructions prior to installation and keep for future reference!
This power supply is to be installed in accordance with Article 450 of the National Electrical Code. The power supply must be installed in a well- ventilated area and free from explosive gasses and vapors. Proper operation requires the free flow of air. As this power supply is hardwired, it should only be installed by a qualified electrician. UL Class 2 recognized.

MODELS	PDCU-W -3×96-24
MAX Load	3×96 watts
A. Length	11.85”
B. Width	4.32”
C. Depth	1.81”
Net Weight	5.2 lbs

Power supply can be mounted vertically or horizontally. With a minimum of 2” clearance around the power supply to provide proper air circulation.
$luminii-PDCU-W-96-24-Pure-DC-Universal-Power-Supply- $3$$
Remove the two Phillips screws from the top of the driver housing and pull the cover off to expose the driver wires. $luminii-PDCU-W-96-24-Pure-DC-Universal-Power-Supply- $4$$
Insert the 120-277 VAC power into the driver housing from the electrical panel. Followed by bringing the 24V DC low voltage wires from the LEDs into the driver housing. In addition, bring the controller wire if applicable. Refer to the diagram on page 2 to make all the proper wiring connections.
$luminii-PDCU-W-96-24-Pure-DC-Universal-Power-Supply- $5$$
Please read all instructions prior to installation and keep for future reference!
This power supply is to be installed in accordance with Article 450 of the National Electrical Code. The power supply must be installed in a well- ventilated area and free from explosive gasses and vapors. Proper operation requires the free flow of air. As this power supply is hardwired, it should only be installed by a qualified electrician. UL Class 2 recognized
$luminii-PDCU-W-96-24-Pure-DC-Universal-Power-Supply- $6$$ $luminii-PDCU-W-96-24-Pure-DC-Universal-Power-Supply- $7$$
Insert the wrie nut connections in the driver housing and close housing cover.
Secure by tightening the two screws. $luminii-PDCU-W-96-24-Pure-DC-Universal- Power-Supply- $1$$