John Lewis Carter Desk White User Manual
- June 7, 2024
- JOHAN LEWIS
Table of Contents
John Lewis Carter Desk White User Manual
Thank you for purchasing the Carter Desk. Please read the instructions and
warnings carefully before use, to ensure safe and satisfactory operation of
this product.
At John Lewis, we are committed to making great products possible.
From our in-house Design Team, to our Buyers, we work together to bring great
designs to life.
Our expert Product Technologists work collaboratively with our buyers and
suppliers to assure the legality, safety and quality of the product we sell.
We are all committed to designing and developing products to the highest
industry standards.
We hope you are happy with your product and welcome any feedback or comments
you may have.
The John Lewis Team
Tools required
Time to assemble: 1 hour
People to assemble:
Important Safety Information
Warnings:
- The product should only be used on firm, level ground.
- Keep small parts out of reach of children.
- Ensure the product is fully assembled as illustrated before use.
Do’s
Check the pack and make sure you have all the parts listed.
Check all screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Don’ts
Do not over tighten screws or bolts.
Do not stand on the product.
Do not use power tools to construct as overtightening and panel failure may
occur.
Your desk
Ref
|
Description
|
Dimensions
|
Qty
---|---|---|---
1
|
Desk top
|
1300x600x111mm 1
|
1
2
|
Leg frame
|
1158x735x35mm 2
|
2
Fixtures and fittings
Fixtures and fittings supplied (actual size)
Ref
|
Description
| Dimension|
Qty
|
---|---|---|---|---
A
|
Assembly bolt
|
M6x40mm
|
14
| 
B
|
Washer
|
M6x12mm
|
14
|
C
|
Spring washer
|
M6x2mm
|
14
|
Fixtures and fittings supplied (not actual size)
Ref
|
Description
|
Dimension
|
Qty
|
---|---|---|---|---
D
|
Allen Key
|
4mm
|
1
|
Product assembly
Carter Desk White 816 26702
Step 1
Parts
1
Please remove the two compartment lids prior to assembly.
Step 2
Parts
2
Gently place the desk top upside down on a soft surface to avoid scratches.
Then place the leg frames as shown.
Step 3
Fittings and tools
A B C D
Insert bolts A with spring washers C and washers B into the allocated holesin
the leg frames.
Do not fully tighten at this stage.
Step 4
Fittings and tools
A B C D
Now insert the remaining bolts A with spring washers C and washers B as shown,
and tighten firmly when all bolts are inserted.
Now also fully tighten all bolts inserted at step 3.
Step 5 – cable management
Step 6
Care guide
Care and maintenance
Wood Furniture
Wood displays different grain patterns depending on which way they cut – for
example, the ‘medullary ray’ which can appear on oak furniture is a mark of
good quality timber – these are just characteristics of the natural beauty of
the wood. Some furniture is also deliberately aged and rustic.
Wood veneers also allow distinctive patterns to be created on flat surfaces,
such as table tops and drawer fronts by the way the slivers are arranged.
All timber surfaces will change colour and mellow over time. New furniture
will initially vary in shade from items that have been previously purchased.
How to care for your wood furniture
Furniture with a painted surface or hard lacquer should be dusted with a dry
cloth.
Spray polishes are best avoided as they contain silicones which may spoil the
furniture’s surface by building up over time.
Make sure all surfaces are protected from heat and liquids by mats and coasters. Wipe up spills immediately and ensure that a mat or pad is placed under paper if you are writing.
Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by central heating can cause damage such as warping
Protect surfaces from scratches and marks by using mats and coasters.
Safety instructions
Never drag furniture when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten
where necessary.
Please take care when handling or moving the furniture as careless handling
may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be
carried out by a competent person. No liability will be accepted for damage or
injury caused by incorrectly installed or assembled furniture.
Retain these instructions for future reference.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>