aarke Glass Bottle for Sparkling Water Maker Carbonator User Manual

aarke Glass Bottle for Sparkling Water Maker

Carbonator User Manual

Carbonator Pro FAQ

Which types of gas cylinder work with the Aarke Carbonator?

Our machine is compatible with AGA, Sodastream (except for Sodastream Quick Connect), Linde, SodaMagic, Vikingsoda, and other standard 400-425g/60l cylinders for sparkling water makers.

Where can I buy or refill a gas cylinder?

400-425g/60L gas cylinders are widely available on Amazon.

What is the difference between Carbonator 3 and Carbonator Pro?

Carbonator 3 is a sparkling water maker with a PET bottle. The Carbonator Pro is designed and engineered for carbonating water with a glass bottle and is therefore equipped with a protective stainless-steel cover.

Is there a way to increase the level of carbonation in my water?

Yes. Once you have pressed down the cover to encapsulate the glass bottle, you push the top button to carbonate. To add more bubbles, just push the button again – and a third time to increase the level of carbonation even more.

Can I carbonate other liquids than water with the Carbonator Pro?

No. Carbonator Pro is designed for carbonating water only. Carbonating any liquids otherthan water can damage the machine’s mechanisms. Therefore, please only carbonate pure water – and add flavourings, fruit, or ice in a separate container after the carbonation, e.g., in a carafe or a glass.

Why does water appear in the drip tray after carbonation with Carbonator

Pro?

It’s normal and expected that a small amount of water collects in the drip tray after carbonation. This happens because the machine’s mechanism is designed to release extra water which might get sucked up with the gas when the handle is released after carbonation.
To minimise the amount of water we would recommend you to:

• Check that you are filling the bottle exactly to the filling line.
• After carbonating the water, pull down the release handle halfway to let the valves evacuate the excess gas at a slower rate. It’s best if you allow the “psshhh” sound to last for 2-3 seconds. Then continue to press the handle all the way down to raise the cover.

Can your glass bottle be used with glass bottle carbonators from other brands? No. The Aarke Glass Bottle Pro is designed for, and can only be used with, the Aarke Carbonator Pro.

Does the Aarke Glass Bottle Pro have an expiration date?

No. As long as the bottle’s structural integrity is intact, and it doesn’t have any cracks or
damages, it can be used without regard to any expiration date.

Can the glass bottle be cleaned in the dishwasher?

Yes, you can clean the Aarke Glass Bottle Pro in the dishwasher. It can withstand a temperature of up to, and including, 70° C, so please do not use a dishwasher program with a higher temperature than that.

Can the Aarke Glass Bottle Pro still be used if it has a scratch?

No. You should never carbonate with a damaged bottle. Before carbonating your water, make sure the bottle is intact and without any scratches or cracks.

Do glass bottles hold carbonation better than plastic bottles?

Yes. Since glass is a more dense and impermeable material than plastic, it has the ability to hold carbonation even better.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>