SDC E75 Series Standalone Electronic Lockset Instruction Manual
- June 6, 2024
- SDC
Table of Contents
SDC E75 Series Standalone Electronic Lockset Instruction
INSTALLATION INSTRUCTIONS
- Keypad Programmable
- 3,000 Users, 32 Temporary Users
- 4 to 6 digit PIN Codes
- Passage Mode Option
- 32 Access Groups, Schedules
- 32 Holidays
- 4 Authority Levels
- Keypad Tamper Lockout
- Mechanical Key Override
- Battery Powered (4AA)
- Blue Backlit Cast Metal Keys
- Weather & Vandal Resistant
- Retrofit existing Lock Door Prep
- Motorized SDC Cylindrical Lockset
- Heavy Duty ANSI Grade 1
- Vandal resistant Lever Handles
- Privacy Mode Option (E75KL & E75PL only)
IMPORTANT: It is highly recommended that installers first view the “E75 STANDALONE ELECTRONIC KEYPAD” video available online at https://www.sdcsecurity.com/videos.htm
Specifications
Power 4AA Batteries (Alkaline only) or
External 12VDC Power @ 30mA
Inputs 1 Request-To-Exit
1 Door Position Switch
Output SPDT Contacts 1A @ 30VDC Relay
Temperature -20 F to +130 F (-30 C to +54 C)
Humidity 5% to 95% non-condensing
Latch Bolt 9/16”
Backset 2-3/4”
Strike 4-7/8” ANSI A115.2
Door 1-3/4” to 2-1/8”
Thickness
Additional Wire Connections (Optional)
Request-To-Exit Input = BLU(N/O) / BLK(COM)
Door Position Switch Input = GRY / BLK(COM)
Auxiliary Relay Output = ORG (N/C) WHT(COM) YEL(N/O)
System Reset = BRN / BRN
12VDC External Power = RED(+) / BLK(-) (22AWG)
( NOTE: Ext. pwr harness ships separately in box)
Steps 8-10 for E75KL and E75PL Privacy models only,
Additional Wire Connections from Keypad (Optional)
Door Position Switch Input = GRY / BLK(COM)
Auxiliary Relay Output = ORG (N/C)
WHT(COM) YEL(N/O)
Factory Reset = BRN / BRN
12VDC External Power = RED(+) / BLK(-)
(22AWG)
( NOTE: Ext. pwr harness ships separately in box)
Programming Instructions
E75 EntryCheck TM
For a complete list of lock programming functions, including programming
for the E75KL/E75PL Privacy Lock, refer to the E75 Programming Guide included
with this lock.
Test the Lock Operation
To test lock operation before initialization, enter *741. This temporary code
will unlock the E75 for testing purposes. Once a lock initialization has been
performed, this code is no longer active until a hardware reset is performed
which will erase all the users and return the E75 back into the uninitialized
factory default condition.
Lock Initialization
When the lock is first installed or after a factory reset has been performed,
the E75 must be initialized with a 4‐digit lock ID before you will be allowed
to enter programming mode
To Initialize Lock:
Press #9* 123456# 0001#
The above example enters a Lock ID of 0001. If multiple locks are used it is
recommended that each lock have its own Unique Lock ID (0002, 0003, etc.).
This is required when using the E7 Management Software.
User Programming
NOTE: You must first enter programming mode to perform any other
function. 20 seconds of inactivity will automatically exit you from
programming mode and return you to operational mode.
Enter Programming Mode:
Press #9# 01# 123456#
User 01 with default PIN Code 123456 is the administrator and has full
programming rights.
Add a User PIN Code (4‐6 digits):
01# User No.# PIN Code # Pin Code # Group No.# Example: Press 01# 04# 5050#
5050# 06#
You have just added User #04 with a PIN of 5050 to unlock the door.
User 4 has been assigned to group 06 (24/7 access).
Add a Single Card: 06# User No.# Present Card Example: Press 06#
04# Present Card
You have just added a card to User #4.
Prox Units Only
User 4 has also be assigned to group 06 (24/7 access).
Add a Sequential Batch of Cards:
08# Starting User No.# No. of Cards# Present 1st Sequential Card Example:
Press 08# 05# 10# Present Card
You have just added (10) proximity card for User #’s 05 to 14.
All users has also be assigned to group 06 (24/7 access).
Exit Programming Mode:
# Press #
Test the lock by pressing 5050#, or present a valid prox card to the reader
(prox units only).
Additional E75 Programming
Refer to the E75 Programming Guide for a complete list of lock programming
functions.
Change a User PIN Code: 03# User No.# New PIN Code # New Pin Code # Example 1:
Press 03# 01# 123123# 123123#
You have just changed the Administrator’s Pin Code to 123123
NOTE: The Administrator’s PIN code must be 6 digits in length. All other
PIN codes may be 4‐6 digits in length
Example 2: Press 03# 04# 1220# You have just changed User #04’s Pin code to
1220
Delete a User: 02# User No.# Example: Press 02# 04#
You have just Deleted User #04
Set Entry Mode : 05# Mode #
Set Entry Mode : 05# Mode #
Example 1: Press 05# 1#
Unlock the door either by entering a (PIN + #) or presenting card.
Mode = 1 PIN or Card (default)
2 Card Only
3 Card AND Pin
Example 2: Press 05# 2#
Unlock the door by presenting a valid card.
Example 3: Press 05# 3#
Unlock the door by presenting card plus the associated user code (PIN + #).
Set Unlock Timer: 21# Seconds#
Example: Press 21# 03 # Seconds = 03‐20
Unlock timer is set for 03 seconds. (default)
Beep on Key Press : 62# Status #
Example 1: Press 62# 1# Status = 0 Disabled 1 Enabled
(default)
The E75 will beep each time you press a key
Set the Date: 30# MMDDYY#
Example: Press 30# 011513 # MM = 2 digit Month DD = 2
digit Day YY = 2 digit Year
The date is set for January 15 th 2013
Set the Time: 31# HH MM#
Example: Press 31# 1320 # HH = Hours (24hr
format) MM = Minutes (24hr format)
The time is now set to 1:20 PM.
Clear all Programming : 99# 000000 #
Example 1: Press 99# 000000 #
All user codes are erased and settings are set to factory defaults. The
Administrator Pin Code and Lock ID are not cleared.
Resetting the E75 to Factory Settings
Warning!! This procedure will preform a hardware reset and will erase all the
users and custom settings returning the
E75 back into the uninitialized factory default condition.
-
Remove power (Unplug the battery pack)
-
Short and hold the 2 Brown Reset wires together
-
Apply power. (Plug in the battery pack)
The left LED will light RED for a few seconds, followed by a flashing RED/GRN. When initialization is complete, you will hear 3 beeps. -
Disconnect and insulate the Brown Reset wires.
-
Return to Page 4 of these instructions to initialize the lock.
P:\INST INSTRUCTIONS\ACCESS CONTROLS\INST-E75