TRIBIT StormBox Flow Portable Wireless Speaker Instruction Manual

June 1, 2024
Tribit

TRIBIT-LOGO

TRIBIT StormBox Flow Portable Wireless Speaker

OVERVIEW

TRIBIT-StormBox-Flow-Portable-Wireless-Speaker-FIG-1

Hereby, Thousandshores Deutschland GmbH declares that the radio equipment type Portable Wireless Speaker BTS13 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration conformity is available at the following internet address: http://files.tribit.com/BTS13-eu-doc.pdf

To Charging The Speaker

  • When charging, the red light is always on.
  • When fully charged (about 4 hours), the red light turns off.

TRIBIT-StormBox-Flow-Portable-Wireless-Speaker-FIG-2

To Charging Other Devices

TRIBIT-StormBox-Flow-Portable-Wireless-Speaker-FIG-3

  • Use the speaker’s USB-C port to connect and charge external devices.
  • The speaker stops charging external devices when the battery level drops below 50%.

Power On/Off

TRIBIT-StormBox-Flow-Portable-Wireless-Speaker-FIG-4

  • Short press the power button once to turn on/off the power.
  • The speaker will automatically shut down when there is no audio input or operation for 15 minutes.

Pairing

TRIBIT-StormBox-Flow-Portable-Wireless-Speaker-FIG-5

  • Short-press the Bluetooth button once to enter pairing mode.
  • Long press the Bluetooth button 25 to disconnect the Bluetooth connection.
  • The speaker can be connected to up to two Bluetooth devices at the same time.

Controls

TRIBIT-StormBox-Flow-Portable-Wireless-Speaker-FIG-6

  • x1: Press once
  • x2: Press twice
  • ×3: Press three times
  • 25: Press and hold for 2 seconds
  • Reset: Press and hold the +- button at the same time for 5s

EQ Selection

TRIBIT-StormBox-Flow-Portable-Wireless-Speaker-FIG-7

  • Short press the EQ button to switch the music mode.
  • The white light is always on for XBass mode.
  • The blue light is always on for the audiobook mode.
  • The light is off for the TRIBIT default sound.

Stereo Mode

TRIBIT-StormBox-Flow-Portable-Wireless-Speaker-FIG-8

  1. First, connect speaker A to Bluetooth on your phone and then press the TWS button;
  2. Ensure that speaker B is not connected to any device, and then press the TWS button;
  3. Both speakers broadcast voices at the same time, indicating that the TWS is successful and speaker A is the host.

Party Mode

TRIBIT-StormBox-Flow-Portable-Wireless-Speaker-FIG-9

  1. Two speakers are already in stereo mode, press any speaker TWS button; mode.
  2. Hear the voice announcement, indicating the switch to party Long press any speaker TWS button 25 to disconnect the group.

TRIBIT APP

TRIBIT-StormBox-Flow-Portable-Wireless-Speaker-FIG-10

Download the TRIBIT app to adjust the EQ settings, upgrade the firmware and explore more features.

Safety Precautions

  • Do not place the speaker in a place where it is easy to fall.
  • Do not disassemble, repair or modify this product by yourself.
  • Keep the speaker away from extreme temperatures.
  • Do not use the speaker in an outdoor thunderstorm environment.
  • Do not use any corrosive cleaners or other chemical solutions to clean the speaker.
  • 12-month warranty.

Specifications

  • Bluetooth Version: V5.3
  • Output Power: 2 5W
  • Bluetooth Protocol: A2DP, AVRCP.HFP.HSP
  • Frequency Response Range: 50~20KHz
  • Frequency Band Range: 2402-2480MHz
  • Maximum Transmission Power: <6dBm|
  • Battery : 3.65V,4800mAh, 17.52Wh
  • Play Time: 30 hours(At 60% volume with XBass off)
  • Charging Time: About 4 hours
  • Waterproofing Grade : 1P67
  • Size : 201mm x 90.4mm x 52.4mm
  • Weight: 660g

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These mats are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

  1. this device may not cause harmful interference,
  2. this device must accept any interference received, including interference that may cause undesired operation.

IC Caution
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:

  1. This device may not cause interference,
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals