HIKVISION DS-PDEB2-EG2-WE Wireless Panic Button (double) User Guide
- June 4, 2024
- Hikvision
Table of Contents
DS-PDEB2-EG2-WE
Wireless Emergency Button
Quick Start Guide
EN 50131-1:2006+A1: 2009+A2:2017
EN 50131-3:2009
EN 50131-5-3:2017
Security Grade SG 2
Environmental Class EC II
Certified by Telefication
telefication
DS-PDEB2-EG2-WE Wireless Panic Button (double)
-
APPEARANCE
1. Indicator
2. Button
3. Tamper Button
4. Battery -
ENROLLMENT
-
INSTALLATION
1. Check signal strength.
2. Align the groove to install the detector.
a. with screw b. with sponge tape
Note : Non-EN compliant after Installation with Sponge Tape. -
TEST
1. Button Activated
2. Alarm Received -
REPLACE BATTERY
User Manual
Scan the QR code for more information and operation help
Specification
| LED indicator | Blue (alarm) |
|---|---|
| LED alarm confirmation | Flashing LED |
| Tamper protection | Front & Back |
| Operating temperature | -10 °C to 55 °C (14 °F to 131 °F) -10 °C to 40 °C (14 |
°F to 104 °F) Certified
Storage temperature| -20 °C to 60 °C (-4 °F to 140 °F)
Operating humidity| 10% to 90%
Dimension (W x H x D)| 63.8mm x 63.8mm x 17.9mm
Weight| 45.5g
Transmission frequency| 868MHz
RF range| 1.2Km (open area)
Battery| CR2450 x 1 (included) 620mAh capacity
Standard battery life| 5 years
PS type| Type C
Low voltage level| 2.60 V
Consumption| Quiescent Current: 23.02uA Max: 36.89mA
Classification| Use inside the supervised premises
User Manual
http://enpinfodata.hikvision.com/analysisQR/showQR/5aaeedeb
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>