anko 42767381 Combo Walker Instruction Manual

June 17, 2024
Anko

anko 42767381 Combo Walker Instruction Manual

WARNING

Read the instructions carefully before use and keep them for future

reference. The child may be hurt if you do not follow these instructions.

Adult assembly required.

WARNING — Never leave the child unattended. Always keep child in view while in walker.
WARNING — The child will be able to reach further and move rapidly when in the baby walking frame.

  • Prevent access to stairs, steps and uneven
  • Use only on flat surfaces free of objects that could cause the walker to tip over.
  • Guard all fires, heating and cooking
  • Remove hot liquids, electrical flexes and other potential hazards from
  • Prevent collisions with glass in doors, windows and furniture .
  • Do not use the baby walking frame if any components are broken or
  • This baby walking frame should be used only for short periods of time (e.g. 20 min).
  • This baby walking frame is intended to be used by children who can sit unaided, approximately from 6 months (seated stage). It is not intended for children weighing more than 12 kg.
  • Do not use replacement parts other than those approved by the manufacturer or distributor.

WARNING—STAIR HAZARD

  • Avoid serious injury or
  • Block stairs/ steps securely before using

CARE & MAINTENANCE

For Seat Pad:Cold delicate machine wash. Do not bleach. May be tumble dried warm. Do not iron. Do not dry clean         . Dry thoroughly before re-use or storage. Not intended for repeated washing.
For walker:Wipe with a damp cloth and dry immediately with a soft clean cloth. Do not use abrasive pads, bleach or strong household cleanser.
Damage may result.NOTE: Clean friction strips regularly with a damp cloth.

WARNING

BATTERY INFORMATION

  • Batteries are to be inserted with the correct
  • Do not mix different types of batteries or new and used
  • Non-rechargeable batteries are not to be
  • Rechargeable batteries are only to be charged under adult
  • Rechargeable batteries are to be removed from the toy before being
  • The supply terminals are not to be short-
  • Remove batteries from the unit when not in use for extended time or when batteries become exhausted.

Dispose of batteries responsibly. Do not dispose of in fire.

PARTS

Assembly diagram

To assemble the frame

To assemble the seat unit

To assemble the seat pad

To attach the seat onto the frame

To adjust the seat height

Battery installation

To assemble the toy tray

To attach toy tray on walker

Using the toy tray

2-level volume adjustment

Converting to push walker

  1. Push the button and push forward the pedal music tray to the end
  2. Remove the seat unit support
  3. Rotate the handle
  4. Child can push the walker forward

Speed adjustment

Push tabs on the rear wheels forward to reduce the speed (recommended when using as a push walker).
Pull tabs backwards to restore to normal speed.

To fold the walker

  1. Press the button and take out the front leg
  2. Fold the front leg
  3. Fold the top tray

IMPORTED BY

© KMART AUSTRALIA LIMITED
ANKO, KIDS&CO. AND BABY SOLUTIONS® ARE TRADEMARKS OF KMART AUSTRALIA LIMITED. THEY ARE USED IN NEW ZEALAND BY KMART NZ
HOLDINGS LIMITED TRADING AS KMART IN NEW ZEALAND.
KMART AUSTRALIA – 690 SPRINGVALE ROAD, MULGRAVE, VIC 3170 AUSTRALIA.
KMART NEW ZEALAND – REGIONAL OFFICE C/O KMART PAPATOETOE STORE, HUNTERS PLAZA, GREAT SOUTH ROAD, PAPATOETOE, AUCKLAND, NEW ZEALAND.
Keycode: 42-767-381 MADE IN CHINA

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals