d line AJ97 Lever Handle Small Polished Brass Installation Guide
- June 13, 2024
- D-Line
Table of Contents
d line AJ97 Lever Handle Small Polished Brass
Product Information
- Product Name: Lever handle AJ97, small
- Item Number: 12404474030
- Surface: Satin finish
- Collection: Arne Jacobsen
- Product Type: Lever handle
- Material: Stainless steel
- Rose Type: Solid
- Center to Center: 30mm
- Door Thickness Range: 33-59mm
- Size: Small
- Certification: EN 1906 to 47-B1140U
- Warranty: 20 years (5 years for coated items)
Product Usage Instructions
- Ensure that the door thickness falls within the recommended range of 33-59mm.
- Locate the desired position for the lever handle on the door.
- Using the provided mounting instructions, follow the steps to properly install the lever handle. The mounting instructions can be found at https://dline.com/mounting-instructions/.
- Make sure to use the included spare parts and accessories if needed. The following spare parts are available:
- Grub screw M5x8,3mm (Item Number: 14970102019)
- Sectioned bolt set M4x110mm with bush (Item Number: 14296174107)
- Spindle for door 33-59mm (Item Number: 14285092092)
- TX10 tool kit (Item Number: 14976700105)
- After installation, ensure that the lever handle is securely attached and functioning properly.
- For product care, refer to the provided instructions or contact service@dline.com for assistance.
Please note that the lever handle AJ97, small is part of the Arne Jacobsen
collection and is made of satin-finished AISI 304 stainless steel. It comes
with a 20-year warranty and is certified in accordance with EN 1906 to
47-B1140U.
If you have any further questions or require additional assistance, please
contact Roskildevej 22, DK-2620 Albertslund, or visit
dline.com.
collection
- Product Solid rose, cc 30mm, 33-59mm, small, stainless steel.
- Tender text Arne Jacobsen collection, lever handle AJ small pair, 8x8mm, solid rose, cc 30 mm, 33-59mm in satin finished AISI 304 stainless steel. Certified in accordance with EN 1906 to 47-B1140U. 20-year warranty.
Product specification
- Dimensions: 124x50x80mm
- Material: stainless steel AISI 304
- Surface finish: satin finished
- 20-year warranty (5 years for coated items)
Dimensions
Available finishes
OVERVIEW
Spare parts/ accessories
- 14970102019 – Grub screw M5x8,3mm
- 14296174107 – Sectioned bolt set M4x110mm with bush
- 14285092092 – Spindle for door 33-59mm
- 14976700105 – TX10 tool kit
Mounting https://dline.com/mounting-instructions/
Product care
- D-line products are produced in the highest quality AISI 304 stainless steel. To sustain the unique d-line finish please follow the below instructions:
- Wash down the surfaces using soapy water or mild detergent
- Always thoroughly rinse off with clean water
- To complete the cleaning procedure dry/polish the surface with a soft dry cloth
- Please do not use scouring powder, steel wool, chloride-based detergents, or other aggressive cleaning products as these may damage the surface.
- If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions, or improper or insufficient cleaning.
- Roskildevej 22
- DK-2620 Albertslund
- dline.com
- service@dline.com
Documents / Resources
| d
line AJ97 Lever Handle Small Polished
Brass
[pdf] Installation Guide
AJ97 Lever Handle Small Polished Brass, AJ97, Lever Handle Small Polished
Brass, Small Polished Brass, Polished Brass
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>