AXAGON PCEU-232VL Superspeed USB 2+2 Port PCI-Express Card Instructions

: June 6, 2024
: AXAGON

Table of Contents

Technical speciﬁcations
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

INSTRUCTIONS
FOR USE
(original)
revision 2.0
PCEU-232VL

SUPERSPEED USB
**2+2 PORT PCI-EXPRESS CARD
Instructions for use (original)

https://www.axagon.eu/produkty/pceu-232vl#supportLinkGoal
PRODUCT SUPPORT LINK
**

PCIe card with two external and two internal SuperSpeed USB ports

FIGURE 1.
Using Device Manager to check whether the installation is correct in Windows 7 (the devices added to the Device Manager during card installation are only displayed)

FIGURE 2.
Using Device Manager to check whether the installation is correct in Windows 10 (the devices added to the Device Manager during card installation are only displayed)

Turn oﬀ your computer and unplug the power supply cable.
Open the cabinet and insert the card into a free PCI-Express position.
Connect the power cable to the 4-pin MOLEX connector.
Close the case, connect the power and turn on the computer.
Windows 10, 8.1, 8:
• The card is detected and installed automatically.
• There is no need to install any drivers, they are part of the OS. Windows 7 :
• The card is detected and the VIA drivers must be installed for the USB 3.0 controller to work properly.
• Download the latest driver from www.axagon.eu/produkty/pceu- 232vl.
• When the download is complete, expand the downloaded ﬁle and run setup.exe.
• Follow the on-screen instructions until the installation is completed.
Check the successful installation in Device Manager (Fig. 1,2).

INFO
To achieve full USB 3.0 speed, you must install the card into the motherboard with a PCI-Express slot compliant with PCIe 2.0 speciﬁcation. Some external SSDs may have a low speed of reading. The solution is to manually install the VIA drivers found on the product page at www.axagon.eu.

Technical speciﬁcations

INPUT INTERFACE:
2x external USB 3.2 Gen 1 ports with USB A-F connectors + 2x internal USB 3.2 Gen 1 ports in ONE 19-pin connectorSuperSpeed USB interface – USB 3.2 Gen 1
(alias USB 3.1 Gen 1 / USB 3.0)
Backward compatible with USB. 2.0 / 1.1
Supported speeds 5000 / 480 / 12 / 1.5 Mb/s (super / high / full / low speed)
OUTPUT INTERFACE:
PCI-EXPRESS 2.0 x1
supported 1x / 4x / 8x / 16x slot
Theoretical speed up to 5Gbps (Bidirectional)
When PCI-Express 1.0 is used, speed is up to 2500Mb/s
OTHER FEATURES:
xHCI rev. 1.0 speciﬁcation
Plug and Play • Hot Plug
UASP in Windows 8 & later
POWER SUPPLY:
Powered via 4-pin MOLEX connector
OS SUPPORTED:
Windows
XP • Vista • 7 • 8 • 8.1 • 10 & later
Server 2008 • 2012 • 2016 & later
32 & 64bit versions supported
Linux 2.6.31 & later
DRIVERLESS:
no driver required for Windows 8 / 8.1 / 10 and Linux

TECHNICAL SUPPORT: More information, FAQs, manuals, and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing helped? Write to our technical support: [email protected].
At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programs in your country, contact your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonization legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The complete EU declaration of conformity is available from the manufacturer.
Before using the product, the user is obliged to read the user’s instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than speciﬁed must be consulted with the manufacturer.
Do not use the product in humid or explosive environments and near ﬂammable substances.

© 2021 AXAGON
Výrobce / Manufacturer: RealQ s.r.o. – Železná 5, 619 00 Brno, Czech Republic
All rights reserved. All text and pictorial materials contained in this document
are protected by Copyright Act.
All marks indicated here are the registered trademarks of their appropriate owners.
Speciﬁcations are subject to change without prior notice.
Made in CHINA for Axagon.

www.axagon.eu