AXAGON RVD-HI DisplayPort HDMI ACTIVE ADAPTER Instructions
- June 4, 2024
- AXAGON
Table of Contents
AXAGON RVD-HI DisplayPort HDMI ACTIVE ADAPTER
ADAPTER CONNECTION
How To Use
Plug the adapter into the computer DP output. Connect the cable from TV /
Monitor / Projector to the adapter HDMI output. Turn on the computer, the
video adapter is ready to use.No need to install any drivers. Turn on the TV /
Monitor / Projector and set the correct input if necessary. Select display
mode by pressing “ ” + “P” keys.
Note:
The video adapter works only one way and does not work bi-directionally.
TECHNICAL SPECIFICATIONS
INPUT INTERFACE
DisplayPort v1.1 Single-mode & Dual-mode support DisplayPort (M) male
connector
OUTPUT INTERFACE
HDMI (F) female connector
SIZE NET WEIGHT
56 x 24 x 12mm & 12g
POWERSUPPLY
Powered via DisplayPort bus
OTHER FEATURES
Audio pass-through DDC (Display Data Channel) HPD (Hot-Plug-Detect) Mirrored
desktop • Extended desktop
OS SUPPORTED
All OS SUPPORTED – OS INDEPENDENT
NOTE:
The resolution depends on the monitor / TV/projector and video card
parameters.
RESOLUTIONS SUPPORTED
- 1920×1200 (16:10) @60Hz WUXGA
- 1920 x 1080 (16:9) Full HD/1080p
- 1680 x 1050 (16:10) WSXGA+
- 1600 x 1200 (4:3) UXGA
- 1600 x 900 (16:9) HD+
- 1440 x 900 (16:10) WXGA+
- 1400 x 1050 (4:3) SXGA+
- 1366 x 768 (16:9) WXGA
- 1360 x 768
- 1280 x 1024 (5:4) SXGA
- 1280 x 960 (4:3) SXGA1280 x 800 (16:10) WXGA
- 1280 x 768 (5:3) WXGA
- 1280 x 720 (16:9) HD/WXGA/720p
- 1280 x 600
- 1152 x 864 (4:3) XGA+
- 1024 x 768 (4:3) XGA
- 800 x 600 (4:3) SVGA
- 640 x 480 (4:3) VGA
TECHNICAL SUPPORT
More information, FAQs, manuals, and drivers can be found on the product page
in the PRODUCT SUPPORT tab at www.axagon.eu.
Nothing helped? Write to our technical support:
support@axagon.cz. At the end of its service life, do not
throw the product into household waste; take it to a collection point for
electrical equipment recycling. For information about collection and recycling
programs in your country, contact your local authorities or the retailer who
sold you the product.
EU declaration of conformity
The device complies with the harmonization legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The complete EU declaration of conformity is available from the manufacturer. Before using the product, the user is obliged to read the user’s instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer. Do not use the product in humid or explosive environments and near flammable substances.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>