AXAGON PCEM2-NC PCIe adapter for NVMe M.2 SSD w. passive cooler User Manual
- June 4, 2024
- AXAGON
Table of Contents
AXAGON PCEM2-NC PCIe adapter for NVMe M.2 SSD w. passive cooler User
Manual
CHECK CORRECT INSTALLATION IN DEVICE MANAGER
FIGURE A
Only devices which are added to the Device Manager when installing the case and the hard drive are displayed
INITIALIZE THE NEW DISK AND FORMAT IT IN DISK MANAGEMENT
FIGURE B
-
UNSCREW THE HEATSINK
-
INSERT COOLING PADS
-
INSERT THE NVMe M.2 SSD DISK
-
FIX THE NVMe M.2 SSD DISK + BRACKET MOUNT
- fix 30, 42, 60, 80mm NVMe M.2 SSD DISK with nut from BOTTOM
5. COMPLETE THE PCIe ADAPTER
TECHNICAL SUPPORT: More information, FAQs, manuals and drivers can be found on
the product page in the PRODUCT SUPPORT tab at www.axagon.eu.
Nothing helped? Write to our technical support: support@axagon.cz.
At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programmes in your country, contact your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonisation
legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS).
The complete EU declaration of conformity is available from the manufacturer.
Before using the product, the user is obliged to read the user instructions.
The manufacturer disclaims any liability for damage that may occur due to
improper use of the product or failure to follow the instructions contained
herein. Product use other than specified must be consulted with the
manufacturer.
Do not use the product in humid or explosive environments and near flammable substances.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>