AXAGON ACU-PD22 Power Delivery 3.0 USB-C Output Wall Charger Instruction Manual
- June 5, 2024
- AXAGON
Table of Contents
ACU-PD22 Power Delivery 3.0 USB-C Output Wall Charger
Instruction Manual
SAFETY AND CORRECT HANDLING
- Ensure that the output parameters of the adapter match the parameters of the powered device. -Only use good quality and undamaged USB cables.
- Do not cross-connect the charging adapter outputs. Adapter damage may occur! – Protect the adapter from high temperatures and mechanical damage. – Use the adapter only in a dry environment
- Protect it from water, do not use it with wet hands, there is a risk of electric shock!
- Do not cover the adapter and allow access to air for sufficient cooling. -The adapter may become hot during use, it is normal.
- If the adapter is damaged, disconnect it IMMEDIATELY and do not use it again! – Do not disassemble, modify, or attempt to repair the adapter. – If you do not use the adapter, unplug it. -The adapter is for indoor use only and the mains voltage is 100 – 240V —.
- Do not leave the adapter unattended.
INPUT & OUTPUT
USEFUL TIP:
DO YOU WANT A FAST, ROBUST, AND STABLE CHARGING CABLE?
FOR QUALITY AXAGON USB CABLES CHECK
https://www.argon.eu/produkt/bely-r-redukce/us-pasivmi
TECHNICAL SUPPORT
More information, FAQs, manuals, and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing helped? Write to our technical support: [email protected].
****| At the end of its service life, do not throw the product into household
waste; take it to a collection point for electrical equipment recycling. For
information about collection and recycling programs in your country, contact
your local authorities or the retailer who sold you the product.
---|---
| EU declaration of conformity: The device complies with the harmonization
legislation of the European Union 2014/35/EU (LVD), 2014/30/EU (EMC), and
2011/65/EU (RoHS). The complete EU declaration of conformity is available from
the manufacturer.
| Before using the product, the user is obliged to read the user’s
instructions. The manufacturer disclaims any liability for damage that may
occur due to improper use of the product or failure to follow the instructions
contained herein. Product use other than specified must be consulted with the
manufacturer.
| Do not use the product in humid or explosive environments and near flammable
substances.
| Degree of Protection 20. The appliance is protected against contact with a
finger; the appliance is not protected against water ingress.
| The appliance of protection class II according to IEC 60536 — appliance with
double insulation.
| The appliance is intended for indoor use in standard conditions only.
PRODUCT SUPPORT LINK
http://axagon.eu/produkty/acu-pd22#supportLinkGoal
© 2021 AXAGON
Vyrobce / Manufacturer: RealQ s.r.o. – Zelezna 5, 619 00 Brno, Czech Republic
All rights reserved. All text and pictorial materials contained in this
document are protected by Copyright Act.
All marks indicated here are the registered trademarks of their appropriate
owners.
Specifications are subject to change without prior notice.
Made in CHINA for Axagon.