AXAGON ACU-QC19 wall charger Instruction Manual

: June 4, 2024
: AXAGON

Table of Contents

SAFETY AND CORRECT HANDLING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

INSTRUCTIONS FOR USE
(original) revision 2.0
ACU-QC19
QUICK CHARGE 3.0
USB Output, WALL CHARGER

SAFETY AND CORRECT HANDLING

Ensure that the output parameters of the adapter match the parameters of the powered device.
Only use good quality and undamaged USB cables.
Do not cross-connect the charging adapter outputs. Adapter damage may occur! Protect the adapter from high temperatures and mechanical damage.
Use the adapter only in a dry environment.
Protect it from water, do not use it with wet hands, there is a risk of electric shock!
Do not cover the adapter and allow access to air for suﬃcient cooling.
The adapter may become hot during use, it is normal.
If the adapter is damaged, disconnect it IMMEDIATELY and do not use it again!
Do not disassemble, modify, or attempt to repair the adapter.
If you do not use the adapter, unplug it.
The adapter is for indoor use only and the mains voltage is 100 – 240V ~.
Do not leave the adapter unattended.

Wall charger

AXAGON ACU QC19 wall charger - Parts

TECHNICAL SUPPORT: More information, FAQs, manuals, and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing helped? Write to our technical support: support@axagon.cz.

| At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programs in your country, contact your local authorities or the retailer who sold you the product.
---|---
| EU declaration of conformity: The device complies with the harmonization legislation of the European Union 2014/35/EU (LVD), 2014/30/EU (EMC), and 2011/65/EU (RoHS). The complete EU declaration of conformity is available from the manufacturer.
| Before using the product, the user is obliged to read the user’s instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than speciﬁed must be consulted with the manufacturer.
| Do not use the product in humid or explosive environments and near ﬂammable substances.
| Degree of Protection 20. The appliance is protected against contact with a ﬁnger; the appliance is not protected against water ingress.
| The appliance of protection class II according to IEC 60536 – appliance with double insulation.
| The appliance is intended for indoor use in standard conditions only.

http://axagon.eu/produkty/acu-qc19#supportLinkGoal

2021 AXAGON
Manufacturer: RealQ s.r.o. – 619 00 Brno, Czech Republic All rights reserved. All text and pictorial materials contained in this document are protected by Copyright Act.
All marks indicated here are the registered trademarks of their appropriate owners. Speciﬁcations are subject to change without prior notice.
Made in CHINA for Axagon.