AXAGON EE25-XA6 USB 3.2 Gen 1 ALINE box Instruction Manual

AXAGON EE25-XA6 USB 3.2 Gen 1 ALINE box

SuperSpeed USB external enclosure for 2.5″ disks

Mount disk to the box

Turn on the computer.
Plug the box to the USB port of the computer. An automatic installation will be performed. No need to install any external drivers. The external disk is ready to use.
In the Device manager, please check the successful installation

CHECK CORRECT INSTALLATION IN THE DEVICE MANAGER

Only devices which are added to the Device Manager when installing the case and the hard drive are displayed In the Disc manager, please initialize the new disk and format it

INITIALIZE THE NEW DISK AND FORMAT IT IN DISK MANAGEMENT

SAFE DISCONNECTION OF EXTERNAL BOX

The safest method for removing from the computer is the utilization of the Safely Remove Hardware function in the Windows operation system.

OPENING OF THE BOX

• A unscrew two screws from front end
• B remove the front end with PCB from box

CONNECTING OF THE 2.5‘‘ HDD/SSD

Connect the PCB into the disk SATA connector

COMPLETING OF THE EXTERNAL DISK

• A insert hard drive into box
• B fix the front end by screws

LED INDICATION

TECHNICAL SPECIFICATIONS

INPUT INTERFACE
USB 3.2 Gen 1 (USB 3.0)  USB 2.0 5000  480 Mbit/s (SuperSpeed HighSpeed) USB Mass Storage Class USB Micro Type B female connector UASP USB Attached SCSI Protocol Rev. 1.0
OUTPUT INTERFACE
SERIAL ATA specification revision 3.0
6 • 3 • 1.5 Gbit/s (SATA/600 • SATA/300 • SATA/150)
2.5″ SATA III / II / I HDD supported max 9.5 mm with all capacities
POWER SUPPLY
USB BUS POWER power supply via USB 3.2 Gen 1 is fully sufficient in all cases
SIZE NET WEIGHT
130 × 78 × 12.5 mm • 75 g
LED INDICATION
DISCREET BLUE LED glare-free & soft shine indicates USB connection & data transfer
OTHER FEATURES
AUTOMATIC INSTALLATION
Plug & Play • Hot Plug
S.M.A.R.T. • TRIM
Auto Spindown • HDD Turn Off
OS SUPPORTED
WINDOWS XP • Vista • 7 • 8.1 • 10 & later
Server 2008 • 2012 • 2016 & later 32&64bit versions supported
OS X 10.4 & later • Linux 2.6.x & later
OPERATING CONDITIONS
0 ~ +40°C 20 ~ 85% humidity

© 2020 AXAGON
Manufacturer: RealQ s.r.o. – Železná 5, 619 00 Brno, Czech Republic All rights reserved. All text and pictorial materials contained in this document are protected by Copyright Act. All marks indicated here are the registered trademarks of their appropriate owners. Specifications are subject to change without prior notice. Made in CHINA for Axagon.
TECHNICAL SUPPORT: More information, FAQs, manuals and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing helped? Write to our technical support: support@axagon.cz. At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programs in your country, contact your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonization legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The complete EU declaration of conformity is available from the manufacturer. Before using the product, the user is obliged to read the user instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer. Do not use the product in humid or explosive environments and near flammable substances.

References

• EE25-XA6 USB 3.2 Gen 1 ALINE box | Axagon

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>