AXAGON PCES-SA4X4 4x Internal Sata 6G Port PCI-Express Controller Instructions
- June 3, 2024
- AXAGON
Table of Contents
AXAGON PCES-SA4X4 4x Internal SATA 6G Port PCI-Express Controller
PCle controller with four internal SATA 6G ports
Technical specification
INPUT INTERFACE
- PCI-Express v3.0 2-Lane (x2)
- PCI-Express v2.0 & 1.0 compatible
- x4, x8, xl 6 slot compatible
- 4 GByte/s max. data rate (PCle 3.0 x2)
OUTPUT INTERFACE
- 4x independent Serial ATA channels
- SATA 6G compatible
- SATA 3.0 – 6 Gbit/s max. data rate
- SATA 2.0 -3 Gbit/s max. data rate
- SATA 1.0 – 1.5 Gbit/s max. data rate
TRIM support
- Hot Plug support
- Boot support
- NCO Native Command QueueinPort Multiplier
- Command Base Switching
- 4 LEDs flash during data transfer (D4 -D7)
- 4 pins for HDD LED (J4)
OS SUPPORTED
- Windows 7 • 8.1 • 10 • 11 & later
- Server 2008 • 2012 • 2016 • 2019 • 2022 & later 32 & 64bit versions supported
- Linux 2.6.x & later Ummm
- Back up the data on the hard disks to be connected to the controller.
- Switch off your computer and unplug the power cable.
- Open the case and insert the controller in a free PCI-Express slot.
- Connect the hard disk or optical drive to the controller using a SATA cable.
- Connect power to the hard disk or optical drive
- Close the case, connect the power and turn on the computer.
- The controller is detected and installed automatically as the standard AHCI 1.0 controller with a Serial ATA interface. Win7: We recommend installing the ASmedia driver from www.axagon.eu/en/ produkty/pces-sa4x4.
- Jn the Device manager, please check the successful installation. (Fig. 1)
- In the Disk manager, please initialize the new disc and format it. (Fig. 2)
TECHNICAL SUPPORT
More information, FAQs, manuals, and drivers can be found on the product page
in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing
helped! Write to our technical support:
support@axagon.z.
At the end of its service life, do not throw the product into household waste;
take it to a collection point for electrical equipment recycling. For
information about collection and recycling programs in your country, contact
your local authorities or the retailer who sold you the product. EU
declaration of conformity: The device complies with the harmonization
legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). Ihe
complete EU declaration of conformity is available from the manufacturer.
Before using the product, the user is obliged to read the user’s instructions.
The manufacturer disclaims any liability for damage that may occur due to
improper use of the product or failure to follow the instructions contained
herein. Product use other than specified must be consulted with the
manufacturer.
Do not use the product in humid or explosive environments and near flammable
substances.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>