AXAGON EEM2-SG2 SATA M.2 SUPERSPEED USB-C 10 Gbps RAW BOX Instruction Manual
- June 5, 2024
- AXAGON
Table of Contents
EEM2-SG2 SATA M.2 SUPERSPEED USB-C 10 Gbps RAW BOX
**Instruction Manual
**
Mount disk to the box. (62. 14 on the next page)
Turn on the computer.
Plug the box into the the-USB port of the computer.
An automatic installation will be performed.
No need to install any external drivers.
The external disk is ready to use.
In the Device manager, please check the successful installation. ( fig. A)
In the Disc manager, please initialize the new disk and format it ( fig.
B)
FIGURE A
CHECK CORRECT INSTALLATION IN THE DEVICE MANAGER
FIGURE B
Only devices are added to the Device Manager when installing the case and the
hard drive is displayed.
INITIALIZE THE NEW DISK AND FORMAT IT IN DISK MANAGEMENT
SAFE DISCONNECTION OF EXTERNAL BOX The safest method for removing from the computer is using the Safely Remove Hardware function in the Windows operating system.
OPEN THE BOX
A Slide and remove the back cover. B Pull out the inside slide.
INSERT THE NVMe OR SATA M.2 SSD DISK
FIX THE NVMe OR SATA M.2 SSD DISK
COMPLETE THE BOX
TECHNICAL SPECIFICATIONS
INPUT INTERFACE
USB-C
USB 3.2 Gen 2 •115B 3.2 Gen 1 (USB 3.0) •115B 2.0
10.000 • 5000 • 480 Mbit/s (SuperSpeed+ • SuperSpeed • High Speed)
115B Type C female connector
SUPPORTED DEVICES
NVMe (PCI-Express)
SATA (AHCI)
M.2 SSD single or double-sided disks, no disk capacity limitation
M.2 disk dimension support: 2242, 2260, 2280 mm
M-KEY AND B+M-KEY M.2 SSD disks supported
NGFF 75-pin M-key slot for M.2 disks
OTHER FEATURES
Plug and Play & Hot Plug
UASP • TRIM • SSD boot support
The total bandwidth/transmission rate of the box is determined by the USB 3.2
Gen 2 interface used (theoretically up to 10 Gbit/s).
The real bandwidth/transmission rate of the box is about 1000 MB/s (1 GB/s)
which is given by the limits of the 1.1583.2 Gen 2 interface.
Compliant with PCI Express Base Specification Revision 3.1a specification
Compliant with NVM Express 1.3 specification
Compliant with Serial ATA 3.1 specification (SATA/600)
Compliant with USB Mass Storage Class specification
Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8
and later Supports BOT (Bulk-Only Transport)
Sleep mode support — after 5 minutes of inactivity,
the Aluminum body helps to cool the M.2 SSD. Higher box surface temperature is
not a defect- thanks to the aluminum body, the heat generated by the disk
operation is better drained and transferred to the environment.
POWER SUPPLY
U513 bus power
supply via USB 3.0 is fully sufficient in all cases.
LED INDICATION
Decent blue LED indicates 1156 connection and data transfer
OS SUPPORTED
MS Windows 7 / 8.1 / 10 and later
Windows Server 2008 / 2012 / 2016 and later
32- and 64-bit versions supported
Mac OS X 10. x and later
Linux 2.6.x and later
Android (OS and device support needed)
Note: drivers are usually part of OS; when Windows 7 is used it is
necessary to check OS support and driver avail-ability with the M.2 SSD
manufacturer.
TECHNICAL SUPPORT: More information, FAQs, manuals, and drivers can be
found on the product page in the PRODUCT SUPPORT tab at
www.axagon.eu. Nothing helped? Write to our technical
support: support@axagon.cz.
At the end of its service life, do not throw the product into household
waste; take it to a collection point for electrical equipment recycling. For
information about collection and recycling programs in your country, contact
your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonization
legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The
complete EU declaration of conformity is available from the manufacturer.
**** Before using the product, the user is obliged to read the user’s
instructions. The manufacturer disclaims any liability for damage that may
occur due to improper use of the product or failure to follow the instructions
contained herein. Product use other than specified must be consulted with the
manufacturer.
Do not use the product in humid or explosive environments and near flammable
substances.
PRODUCT SUPPORT LINK
http://axagon.eu/produkty/eem2-sg2#supportlinkGoal
SuperSpeed USB 10Gbps external enclosure for NVMe & SATA M.2 SSD
© 2021 AXAGON
Vyrobce / Manufacturer: RealQ s.r.o. – 2elezna 5, 619 00 Brno, Czech Republic
All rights reserved. All text and pictorial materials contained in this
document are protected by Copyright Act. All marks indicated here are the
registered trademarks of their appropriate owners. Specifications are subject
to change without prior notice. Made in CHINA for Axagon.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>