AXAGON ADR-205 Active USB 2.0 Extension Cable Instructions
- June 4, 2024
- AXAGON
Table of Contents
INSTRUCTIONS FOR USE
(original) revision 1.0
ADR-205
ACTIVE USB 2.0 EXTENSION CABLE 5m CABLE
ADR-205 Active USB 2.0 Extension Cable
Turn on the computer.
Connect the cable to your computer’s USE port.
An automatic installation will be performed.
No need to install any external drivers.
The USB extension cable is ready.
CHARGING
- Power via a computer USB port is sufficient for most connected USB devices.
- For connecting an external 2S” hard drive, it is usually necessary to use an additional power supply.
- When connecti multiple active U cables are behind each other, the supply voltage is reduced and it is better to use the additional power supply of the last active cable in a row.
- The supplied power cord allows additional power from a regular mobile phone charger with min. 5V/lA USB-A output
TECHNICAL SPECIFICATIONS
INPUT INTERFACE
USB 2.0 • USB 1.1
USB Type-A (M) male connector
OUTPUT INTERFACE
USB 2.0 • USB 1.1 480 • 12 • 1.5 Mbit/s (High • Full • Low Speed)
USB Type-A (F) female connector
POWER SUPPLY
USB bus power & self-power 3.5 mm connector for additional power
OTHER FEATURES
Plug and Play • Hot Plug AUTOMATIC INSTALLATION
OS SUPPORTED
WINDOWS XP • Vista • 7 • 8 • 8.1 • 10 & later
Server 2008 • 2012 • 2016 & later
32 & 64bit versions supported
OS X 10.x & later • Linux 2.6.x & later
TECHNICAL SUPPORT: More information, FAQs, manuals, and driving can be found
on the product page In the PRODUCT SUPPORT tab at
www.axagon.eu. Nothing helped? Write to our technical
support: support@axagon.cz.
At the end of its service life, do not throw the product into household waste;
take it to a collection point for electrical equipment recycling. For
information about collection and recycling programs In your country, contact
your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonization
legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The
complete EU declaration of conformity is available from the manufacturer.
Before using the product, the user is obliged to read the user’s instructions.
The manufacturer disclaims any liability for damage that may occur due to
improper use of the product or failure to follow the instructions contained
herein. Product use other than specified must be consulted with the
manufacturer.
Do not use the product in humid or explosive environments and near flammable
substances.
PRODUCT stippoRT LINK
http://axagon.eu/produkty/adr-205#supportLinkGoal
****www.axagon.eu
© 2021 HEXAGON
V9robce / Manufacturer: RealQ s.r.o. – Zelezna 5, 619 00 Brno, Czech Republic
All rights reserved. All text and pictorial materials contained in this
document are protected by Copyright Act.
All marks indicated here are the registered trademarks of their appropriate
owners.
Specifications are subject to change without prior notice.
Made in CHINA for Axagon. 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>