AXAGON ADSA-D25 Superspeed USB Dual 2.5 Ich HDD or SSD Mini Dock With Clone Function Instruction Manual
- June 4, 2024
- AXAGON
Table of Contents
AXAGON ADSA-D25 Superspeed USB Dual 2.5 Ich HDD or SSD Mini Dock With
Clone Function
INSTALLATION STEPS connection
- Connect the power cable to the USB port o r suitable USB charger, then connectthecable to the connector. For charging use only supplied cable
- Connect the docking station to the computer uslng the USB 3.0cable.
- lnsert the hard disk in the HDD A or HDD B bay of the docking station.
- Pressbrlefly (l sec)hard disk will be detected 5. Pevn)’ disk bude detekovan and installed automatically.
SAFE REMOVAL OF DEVICE
- Never remove the hard disk from the station during operation; the disk must be connected for the entire period of operation with the docking station
- If you want to disconnect the hard disk, make sure that data Copying is finished and the HDD A or HDD B data transfer indicator is not blinking.
- Then press the ON/OFF power button to switch off the station.
- The station with the disk will be disconnected from the Computer.
- However, the safest method of disconnecting disks from computers is to use the function of the Windows operating system-safe removal of hardware. We recommend using this method.
INFO
After connecting to the a computer using the USB cable, the hard disk is
always automatically Plug&Play detected. If the hard disk is detected in the
Device Manager, but it is no
displayed in the My Computer folder, check that it has been assigned in the
Disk Manager. Initialize and format the new disk in the Disk Manager.
CLONING/DUPLICATING DISK CONTENT CLONE
FUNCTION
- Connect the power cable to the USB port or suitable USB charger, then connect the cable to a DC 5V connector. For charging use only supplied cable.
- Do not connect the docking station to the computer using9 the USB cable.
- Insert the source hard disk into the HDD A bay of the docking station.
- Insert the target hard disk intO the HDD B bay of the docking station.
- Press the ON/OFF button at back of the station to switch on the power. Green Power LED lights up.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>