AXAGON PCES-SA6 6x Internal Sata 6G Port PCI-Express Controller Instruction Manual
- June 5, 2024
- AXAGON
Table of Contents
AXAGON PCES-SA6 6x Internal Sata 6G Port PCI-Express Controller Instruction
Manual
Instructions For Use
-
Back up the data on the hard disks to be connected to the controller.
-
Switch off your computer and unplug the power cable.
-
Open the case and insert the controller in a free PCI-Express slot.
-
Connect the hard disk or optical drive to the controller using a SATA cable.
-
Connect power to the hard disk or optical drive.
-
Close the case, connect the power and turn on the computer.
-
The controller is detected and installed automatically as the standard AHCI 1.0 controller with Serial ATA interface. In order to use other features of the controller, you can install ASMedia drivers.
-
In the Device manager, please check the successful installation. (Fig. 1)
-
In the Disk manager, please initialize the new disc and format it. (Fig. 2)
Technical specifications
INPUT INTERFACE
PCI-Express v3.0 2-Lane (x2)
PCI-Express v2.0 & 1.0 compatible
x4, x8, x16 slot compatible
4 GByte/s max. data rate (PCIe 3.0 x2)
OUTPUT INTERFACE
6x independent Serial ATA channels
SATA 6G compatible
SATA 3.0 – 6 Gbit/s max. data rate
SATA 2.0 – 3 Gbit/s max. data rate
SATA 1.0 – 1.5 Gbit/s max. data rate
TRIM support
Hot Plug support
NCQ Native Command Queueing
Port Multiplier Command Based Switching
OS SUPPORTED
Windows 7 • 8.1 • 10 & later
Server 2008 • 2012 • 2016 & later 32 & 64bit versions supported
Linux 2.6.x & later
Product Support Link
http://axagon.eu/produkty/pces-sa6#supportLinkGoal
TECHNICAL SUPPORT
More information, FAQs, manuals and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing helped? Write to our technical support: support@axagon.cz.
At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programmes in your country, contact your local authorities or the retailer who sold you the product.
EU declaration of conformity : The device complies with the harmonisation legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The complete EU declaration of conformity is available from the manufacturer. AL,
Before using the product, the user is obliged to read the user instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer.
Do not use the product in humid or explosive environments and near flammable substances.
2021 AXAGON Vyrobce / Manufacturer: RealQ s.r.o. – Zelezna 5, 619 00 Brno, Czech Republic All rights reserved. All text and pictorial materials contained in this document are protected by Copyright Act. All marks indicated here are the registered trademarks of their appropriate owners. Specifications are subject to change without prior notice. Made in CHINA for Axagon.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>