AXAGON ADSA-1S6 Superspeed USB Adapter for 2.5 Inch HDD/SSD Instruction Manual

AXAGON ADSA-1S6 Superspeed USB Adapter for 2.5 Inch HDD/SSD

Instructions for use

1. Turn on computer.
2. Connect the USB adapter to the disk SATA connector.
3. Connect the adapter to the USB port of the computer.
4. The hard disk will be detected and installed automatically.

INFO
If you want to disconnect the hard disk, make sure that data  copying is finished and the data transfer  indicator is not blinking.

TECHNICAL SPECIFICATIONS

INPUT INTERFACE

• USB 3.2 Gen 1 (USB 3.0) • USB 2.0
• 5000 • 480 Mbit/s (SuperSpeed • HighSpeed)
• USB Mass Storage Class
• USB Type A male connector

OUTPUT INTERFACE

• SERIAL ATA specification revision 3.1
• 6 • 3 • 1.5 Gbit/s (SATA/600 • SATA/300 • SATA/150)
• 2.5″ SATA III / II / I HDD disks supported with all capacities adapter and disk located in the case – max. disc thickness 9.5 mm use without case – without limiting the thickness of the disk
• 22-pin SATA data and power female
• 5 Gbit/s theoretically (given by USB input)

POWER SUPPLY

• Power through USB bu

OTHER FEATURES

• UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport) AUTOMATIC INSTALLATION
• Plug & Play • Hot Plug • S.M.A.R.T. • TRIM
• Auto Spindown • HDD Turn Off

LED INDICATION

• BLUE LED indicate connection to PC & HDD activity

OS SUPPORTED

• WINDOWS XP • Vista • 7 • 8 • 8.1 • 10 & later
• Server 2008 • 2012 • 2016 & later
• 32 & 64bit versions supported
• OS X 10.x & later • Linux 2.6.x & later

TECHNICAL SUPPORT:

• More information, FAQs, manuals and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing helped? Write to our technical support: [email protected].
• At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programmes in your country, contact your local authorities or the retailer who sold you the product.
• EU declaration of conformity: The device complies with the harmonisation legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The complete EU declaration of conformity is available from the manufacturer.
• Before using the product, the user is obliged to read the user instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer.
• Do not use the product in humid or explosive environments and near flammable substances.

References

• ADSA-1S6 USB 3.0 - 2.5" HDD SATA | Axagon

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>