AXAGON HMA-CR3A Superspeed USB-A Hub with 3 USB and Card Reader Instructions
- June 6, 2024
- AXAGON
Table of Contents
****
AEXAGON HMA-CR3A Superspeed USB-A Hub with 3 USB and Card Reader
****
Instructions for use
1. Turn on the computer.
2. Connect the hub to the PC USB port.
3. An automatic installation will be performed. No need to install any
external drivers.
4. The hub is ready.
Three-port SuperSpeed USB hub and memory card reader
TECHNICAL SPECIFICATION
INPUT INTERFACE
USB 3.2 Gen 1 (USB 3.0) • USB 2.0
S000 • 480 • 12 • 1.5 Mbit/s (Super, High, Full, Low Speed)
USB Type-A male connector
20 cm FIXED USB CABLE
OUTPUT INTERFACE
3 USB 3.2 Gen 1 ports with USB Type-A female connectors
2-slot USB 3.2 Gen 1 card reader
SD v1.0•v1.1 • v2.0•v3.0(UHS-I)
SDHC <32GB • SDXC <2TB
MMC v3.x • v4.0 • v4.1 • v4.2
2 LUN – card to card direct copy
POWER SUPPLY
up to 1.5 Amp CHARGING on USB ports
power through the USB bus
OTHER FEATURES
APPLE CHARGING supported
Over Current Protection
up to 3 external disks can be connected at the same time
AUTOMATIC INSTALLATION
Plug & Play • Hot Plug
LED INDICATION
the LED indicates the connection of the hub to the power supply
OS SUPPORTED
WINDOWSXP•Vista • 7 •8 •8.1 • 10& later
Server 2008 • 2012 • 2016 & later
32 & 64bit versions supported
OS X10.x&later
Linux 2.6.x & later
TECHNICAL SUPPORT:
More information, FAQs, manuals and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.hexagon.eu. Nothing helped? Write to our technical support: support@axagon.cz.At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For infonnation about collection and recycling programs in your country, contact your local authorities or the retailer who sold you the product.
CE: EU declaration of conformity: The device complies with the harmonization sprzedal ci product. CE: EOVYHLASENIE O ZHODE:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>