AXAGON HUE-P1A 4-Port SuperSpeed USB-A Round Hub Instruction Manual
- June 6, 2024
- AXAGON
Table of Contents
AXAGON HUE-P1A 4-Port SuperSpeed USB-A Round Hub
INSTRUCTION FOR USE
- Turn on
- Connect the hub to the PC USB port.
- An automatic installation will be performed. No need to install any external drivers.
- The hub is ready.
INFO
Any USB charger and a suitable cable with a micro USB connector can be used for the external power supply of the hub (recommended charger output current is 2A).
TECHNICAL SPECIFICATION
INPUT INTERFACE
USB 3.2 Gen 1 (USB 3.0) • USB 2.0 5000 • 480 • 12 • 1.S Mbit/s (Super• High•
Full • Low Speed)
USB Type A male connector
30 cm FIXED USB CABLE
OUTPUT INTERFACE
4 USB 3.2 Gen 1 ports with USB Type A female connectors
POWER SUPPLY
up to 1.5 Amp CHARGING on USB ports power through USB bus or power through
optional power adapter (SV/2A min)
OTHER FEATURES
APPLE CHARGING supported Over Current Protection up to 3 external disks can be
connected at the same time
AUTOMATIC INSTALLATION
Plug & Play • Hot Plug
LED INDICATION
the LED indicates the connection of the hub to the power supply
OS SUPPORTED
WINDOWS XP •Vista• 7 • 8 • 8.1 • 10 & later Server 2008• 2012• 201 6& later 32
& 64bit versions supported OS X 1 O.x & later Linux 2.6.x & later
TECHNICAL SUPPORT: More information, FAQs, manuals and drivers can be agon.eu. found Nothing on the helped? product Write to page our in the technical PRODUCT SUPPORT tab at support@axagon.cz.